Troy@lemmy.ca to Electronics@discuss.tchncs.deEnglish · 2 days agoOpened an old scientific instrument to see if it works...lemmy.caimagemessage-square50fedilinkarrow-up1166arrow-down11file-text
arrow-up1165arrow-down1imageOpened an old scientific instrument to see if it works...lemmy.caTroy@lemmy.ca to Electronics@discuss.tchncs.deEnglish · 2 days agomessage-square50fedilinkfile-text
Instrument is a Geonics EM16 VLF receiver, using in the mineral exploration industry to find buried linear conductors.
minus-squareMehBlah@lemmy.worldlinkfedilinkEnglisharrow-up5·2 days agoIt works. I’ve done it quite a few times. I have used a Dremel tool to buff the contacts and used a light coating of dielectric grease to prevent further corrosion.
minus-squareMehBlah@lemmy.worldlinkfedilinkEnglisharrow-up1·20 hours agoYes, wear gloves and eye protection. Those small wires would be a nightmare get out of your skin even more so for the eyes.
It works. I’ve done it quite a few times. I have used a Dremel tool to buff the contacts and used a light coating of dielectric grease to prevent further corrosion.
A brush on the dremel?
Yes, wear gloves and eye protection. Those small wires would be a nightmare get out of your skin even more so for the eyes.