• carpelbridgesyndrome
        link
        fedilink
        English
        arrow-up
        5
        ·
        2 months ago

        Mmm yes. 5 bit two’s complement.

        I shouldn’t make fun of it we’ve definitly made some ISA that weird.

      • swag_money@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        2 months ago

        what’s the general rule for translating negatives from binary? did you just do like 17 - 2 • (-1) or something?

        • Yardy Sardley@lemmy.ca
          link
          fedilink
          English
          arrow-up
          5
          ·
          2 months ago

          I used what known as 2’s compliment. Take the complement (flip all the bits - here that would give you 01110 which is 14) then add 1.

          • swag_money@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            2 months ago

            thanks for the explanation! could you express it as a NOT operation plus one? like is that how it would be processed at a low level?

            • computergeek125@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              2 months ago

              My low level is a tad rusty from when I learned the C side in school, but if I recall the not operator resolves as a single Boolean (0 or 1 in true C), whereas compliment comes back as however many bits you put in - a not operation per bit.

              In C, the not operator is ! and the compliment operator is ~

      • Trainguyrom@reddthat.com
        link
        fedilink
        English
        arrow-up
        16
        ·
        2 months ago

        Among many other duties I manage the safety and claims database for an outsourced industrial cleaning company and let me tell you, some of the plants my company works struggle to make it a week without an accident, meanwhile some will go years without an accident. We also have one plant which had its last accident during the Bush Administration. Its absolutely wild how much safety can vary from one industrial facility to another

    • Phoenixz@lemmy.ca
      link
      fedilink
      English
      arrow-up
      41
      arrow-down
      1
      ·
      2 months ago

      Unless it’s a signed integer, then it’s -1 and they’re expecting something…

  • Hjalmar@feddit.nu
    link
    fedilink
    English
    arrow-up
    105
    ·
    2 months ago

    It’s even worse considering that they only have five boards. They expect at least one accident every month

    • Gormadt@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      19
      ·
      edit-2
      2 months ago

      I work in the LTL freight industry, if we go 30 days without an accident or an injury we get a free BBQ day with unlimited food for everyone. We’re talking burgers, hotdogs, chilli, chowder, chips, drinks, etc. Sometimes they even do catering. Our last one they did Hawaiian Food for 2 days (they got too much) which definitely made everyone happy.

      I’ve been there for almost 10 years, we average about 2 per year.

      Edit to clarify: 2 BBQs per year. We’re really good as getting hurt.

      • kraftpudding@lemmy.world
        link
        fedilink
        English
        arrow-up
        7
        ·
        2 months ago

        I wonder if that’s still cheaper, because it makes people value safety of others but also because it raises the burden to report smaller accidents and workmans comp fraud because of peer pressure.

        • smeenz@lemmy.nz
          link
          fedilink
          English
          arrow-up
          3
          ·
          2 months ago

          The cost is in the lost productivity from having someone off work with injuries. A barbecue every 6 months seems like a bargain.

          • Gormadt@lemmy.blahaj.zone
            link
            fedilink
            English
            arrow-up
            3
            ·
            2 months ago

            It really is, the average time loss injury in our company is usually upwards of 30k down the drain. And just an accident can be catastrophic in terms of cost as well.

            A BBQ compared to that is nothing.

        • Gormadt@lemmy.blahaj.zone
          link
          fedilink
          English
          arrow-up
          5
          ·
          2 months ago

          Less than Truck Load

          Basically if a company want to ship pallets of crap but they don’t have enough to justify using their own truck

          Think TForce, YRC, Oak Harbor, FedEx Freight, etc.

  • xenoclast@lemmy.world
    link
    fedilink
    English
    arrow-up
    30
    arrow-down
    2
    ·
    2 months ago

    It bothers me it’s not in 4 bit “bytes” even though I know it’s just a convention for computers

      • Revan343@lemmy.ca
        link
        fedilink
        English
        arrow-up
        7
        ·
        2 months ago

        That’s a matter of convention, not technical definition. A byte can be any number of bits, depending on hardware. For a while 6 bit bytes were common. RFC 791 refers to an 8 bit byte as an octet

        • Kazumara@discuss.tchncs.de
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          2 months ago

          RFC 791 refers to an 8 bit byte as an octet

          French-speaking people do too it seems. On second hand websites in Switzerland you always see that some disks are listed for e.g. 250 Go and others for 250 GB, depending on the first language of the seller.

    • finitebanjo@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 months ago

      You can do all of math in binary, it isn’t just for computers. In fact, the proof for “Russian Peasant Multiplication” was written in binary.

      • ziggurat@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        3
        ·
        edit-2
        2 months ago

        So you can do all mathematical operations in binary, but you can’t represent all numbers in binary like 0.3, which is a repeating number, and had the same issues as a number like 1/3 in decimal where you can’t avoid rounding errors

        It’s worth noting that 1/3 is also a repeating number in binary. 0.01010101…

        While 0.3 is in binary 0.0100110011001100…

        • finitebanjo@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          ·
          edit-2
          2 months ago

          I’m not sure what sort of point you think you’re making but 0.0100110011 in binary is only 0.065% off from 0.3, but how often would you organically encounter 0.3?

          Many fractions in decimal are also repeating numbers or very long trailing numbers, I especially encounter a lot when working with time which is base 60.

    • tetris11@lemmy.ml
      link
      fedilink
      English
      arrow-up
      13
      ·
      edit-2
      2 months ago

      Twos complement (invert the bits then add one), so its -15 days.

      Otherwise 00000 and 10000 would paradoxically both equal 0 and make bitwise equality checks very difficult.

  • Seraph@fedia.io
    link
    fedilink
    arrow-up
    12
    ·
    2 months ago

    They’ve never gone more than a month without an accident? Find a new work place immediately!

    • Gormadt@lemmy.blahaj.zone
      link
      fedilink
      English
      arrow-up
      4
      ·
      2 months ago

      With a large enough workplace in the wrong industries it’s really easy to have something that could count against it.

      I work in the LTL freight industry, we get quite a few.