Assuming that these have fairly impressive 100 MB/s sustained write speed, then it’s going to take about 93 hours to write the whole contents of the disk - basically four days. That’s a long time to replace a failed drive in a RAID array; you’d need to consider multiple disks of redundancy just in case another one fails while you’re resilvering the first.
This is one of the reasons I use unRAID with two parity disks. If one fails, I’ll still have access to my data while I rebuild the data on the replacement drive.
Although, parity checks with these would take forever, of course…
That’s a pretty common failure scenario in SANs. If you buy a bunch of drives, they’re almost guaranteed to come from the same batch, meaning they’re likely to fail around the same time. The extra load of a rebuild can kill drives that are already close to failure.
Which is why SANs have hot spares that can be allocated instantly on failure. And you should use a RAID level with enough redundancy to meet your reliability needs. And RAID is not backup, you should have backups too.
My Jellyfin just quivered…
When will it be commercially available though? Supposedly Seagate has had 30TB drives out for the better part of a year, but I can’t find anything larger than 24TB actually available for purchase.
I’ve been waiting for a 32TB to become available as well, Seagate announced that drive last year and it’s still not available outside data centers. I suspect the WD one will be the same.
I’ve been looking to buy a couple 24TB drives. Hopefully, this pushes their price down.
Peertube instance owners rejoice!
Or just people who download porn.
That’s… a lot of porn.
Who doesn’t have multiple TB of videos just laying around?
*Raises hand confidently
I prefer 1980s porn jpgs around 90kB each thankyouverymuch.
It’s crazy sizes though uf you think about it, I have like 2 or 4 TB drives and they are far from full.
deleted by creator
Damn, how are you so confident?
Nobody will remember or care if he’s wrong.
Archive link: https://archive.ph/CAxE9
