Static credentials with passwords written into a firewall’s code. What could go wrong?

    • jmcs@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      14
      arrow-down
      1
      ·
      edit-2
      3 days ago

      Right in the Security Advisory

      allow an unauthenticated, local attacker to access an affected system using static credentials.

      Edit: NVM, later it says

      The second is using SSH, which is enabled by default on the management interface of the device.

      • horse_battery_staple@lemmy.world
        link
        fedilink
        English
        arrow-up
        14
        ·
        3 days ago

        That could be any user logged into the CLI. Cisco is famously a network appliance company and they make admin available over the network. Anyone who can get to the LAN/VLAN these appliances are on can exploit this. So not specifically physical access.

        • jaybone@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          ·
          2 days ago

          Nothing prevents you from putting this on a LAN that can be accessed from over the internet.

          • jmcs@discuss.tchncs.de
            link
            fedilink
            English
            arrow-up
            5
            ·
            2 days ago

            Even if it’s not directly accessible from the internet on its own, if it’s accessible from an host exposed to the internet then anyone that can compromise a single host can immediately compromise the firewall.

            “It’s only exposed to the outdated wordpress server” is effectively the same as being exposed to the internet.

            • jaybone@lemmy.world
              link
              fedilink
              English
              arrow-up
              5
              ·
              2 days ago

              Yeah that’s my point. Even if the manufacturer actually limits the IP config on the mgmt interface to be configured as not routable over the internet, it could intentionally be on a subnet accessible by some kind of ssh jump server or bastion host. (Or in your example, maybe unintentionally via the Wordpress server.)