• Hellfire103@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      12
      arrow-down
      1
      ·
      16 hours ago

      Yep! I just installed Void about ten minutes ago off a 2GB stick from the mid-2000s. Somehow, those little sticks just keep going!

      • ma1w4re@lemm.ee
        link
        fedilink
        arrow-up
        5
        ·
        15 hours ago

        Same! I have a 4gb white SanDisk stick, from like 12-14 years ago and is still working 💀💀 it even died on me once, and started working again after a few days 😳😳

      • f4f4f4f4f4f4f4f4@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        2
        ·
        13 hours ago

        Keep them around. I was playing with and testing some ~15 years old mobos for work, and they would not boot from any USB3.0 stick I tried. Same images on an 8GB USB2.0 stick booted with no problem.

        Name and shame: Biostar motherboard

      • kekmacska@lemmy.zip
        link
        fedilink
        English
        arrow-up
        1
        ·
        13 hours ago

        for an usb, it might work. For such an old hard drive, it won’t. Linux will refuse to boot

          • kekmacska@lemmy.zip
            link
            fedilink
            English
            arrow-up
            2
            ·
            2 hours ago

            i know it from experience. When i wanted to install a modern Linux on a 2009 hdd, it installed, but simply refused to boot, even though hdsentinel said the hdd is 100℅ healthy

    • BCsven@lemmy.ca
      link
      fedilink
      arrow-up
      7
      ·
      14 hours ago

      I buy them specifically with LED. It s helpful for data transfer, but also helpful for doing a flash of new OS to old nas hardware… You have to hold reset button in on nas until you see it start to read USB (by LED) then you know you can release the reset button.