cross-posted from: https://aussie.zone/post/1198065

We can and should be allowed to drive faster on our freeways and motorways; but don’t think governments will let it happen overnight.

  • Pons_Aelius@kbin.social
    link
    fedilink
    arrow-up
    30
    arrow-down
    1
    ·
    1 year ago

    Counter point: The Aus driving tests don’t prepare/train drivers for the current highway speeds as it is.

    If we implemented a system like Finland’s, where new drivers are actually taught how to handle vehicles in adverse situations and conditions then I agree raising the speed limit would be feasable.

    But that would require a huge state gov investment in training infrastructure and that will never happen.

      • Pons_Aelius@kbin.social
        link
        fedilink
        arrow-up
        13
        ·
        edit-2
        1 year ago

        And we never retest anyone.

        You were able to do a reverse park once? Cool, you are now allowed to dive for the rest of your life.

        Every person should be retested every 5 years.

        • skribe@aussie.zone
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          They couldn’t possibly do that in WA. There’s about a six month wait now to book a driving test. That’s just for new drivers.

          • Pons_Aelius@kbin.social
            link
            fedilink
            arrow-up
            4
            ·
            1 year ago

            But that would require a huge state gov investment in training infrastructure and that will never happen.

    • Salvo@aussie.zone
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      Also, The current condition (and ongoing condition) of Australia’s primary road surfaces are unsafe even at the current speed limit.

      The combination of poor initial construction, decades of neglect, bushfires, floods, abuse by speeding and overweight road users has resulted in a regional road network that is so far gone that the most cost effective solution is to tear up whole sections and start from scratch.