At the moment I’ve dusted off a guitar and a bass I bought close to 20 years ago, an Ibanez EDB300 bass guitar
Ibanez
and my FrankenFender
FrankenFender
a modified/mutilated Fender MusicMaster.

Without more experience then just messing about with a bad accoustic I thought those weren’t to bright purchases, but at least I had a chance on getting to learn to play them, although I just started last month. (after fixing the FrankenFender, the added pickup is dead)

When shopping for some useful additions (tuner, neckband, stand) I however found the Fazley FMB218NT
fretless
at a very low cost, so I just added it to the basket before checking out. I think for now, buying a fretless bass when just learning to play tops it (for now), although I hope it manages to force me to concentrate more on the left hand.

I guess I’m not the only one that was a tad to enthusiastic when starting, what do you all consider as your (initially) bad decisions and how did they turn out?

Edit: Layout corrections and used my own pick for the Fazely instead of a static one from the shop (that didn’t work in [email protected])

  • Mugmoor@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    I adore my LTD with its Floyd Rose bridge, but boy do I absolutely dread restringing it. Definitely not something for a beginner.

    • rug_burn
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Little trick you can try when re-stringing most trem equipped guitars - take the spring cover plate off and find a piece of wood that will hold the block in place BEFORE you remove the old strings. Then when you’re done restringing, gently remove the piece of wood. Might not be perfect, but it will get you in the neighborhood a lot faster.

      • Mugmoor@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Yeah I use a deck of cards for the same effect. The problem I run into is that my set screws got stripped a while back at the same time I changed gauges. It’s never been quite balanced since. I really need to replace those screws.

        • eatmoregreenfood@kbin.social
          link
          fedilink
          arrow-up
          2
          ·
          1 year ago

          I have an X series Jackson Soloist. Absolutely change the screws. Also next time you have your Floyd Rose out, tighten the whammy bar post on the bridge itself.

          As for tuning. I usually tune G, D, B, A, HIGH E, LOW E. If you have the bridge blocked off (I use a broken pencil with masking tape wrapped around it until it’s the right thickness), it really does make it easier to tune that way. And always tune in the playing position as gravity will affect the tension of the bridge.