We built a house 7 years ago and it’s insulated and has double glazing. I’ve installed Home Assistant with temp sensors in the bed rooms and seeing 70%+ humidity levels. Temperature is always above 16c

We ventilate it, but still it’s 70% in the bedrooms. WHO recommends 40-60%, so we’re a bit worried.

Living room is around 55% during the day when we have the heat pump set at 21c.

As it’s pretty humid outside I think it’s almost impossible to get it lower, but are there any other tips? I don’t want to run dehumidifiers. Would an HRV like system help?

  • Lemmyin@lemmy.nz
    link
    fedilink
    arrow-up
    2
    ·
    2 years ago

    Hey hey. Yeah I’ve been toying with the idea of going to a dockerised setup for HA. I run it as a VM on one of my servers and that’s been rock solid along with add ons and the like.

    My moto with this whole HA thing was to always do it as cheaply as I can. That has meant a fair amount of building circuits and such myself which is quite a bit of fun.

    Also check out ESPHome. It’s great and integrates into HA very well.

    • Dave@lemmy.nzM
      link
      fedilink
      arrow-up
      2
      ·
      2 years ago

      Thanks for the suggestion, I’ll take a look!

      I don’t think I would know where to start with “building circuits”…

      • sylverstream@lemmy.nzOP
        link
        fedilink
        arrow-up
        2
        ·
        2 years ago

        If you want some very specific stuff like height sensors for standing desks (something I still need) you will have to go the self build route. Also to make my dumb alarm smart I have to do some soldering apparently.

        That is my next rabbit hole I guess :)

      • Lemmyin@lemmy.nz
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Heh it’s great fun and there are tons of guides. It’s just hooking up wires mostly :). I would call it building circuits I guess haha.

    • TagMeInSkipIGotThis@lemmy.nz
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Yeah I run HA as a docker container on unRaid, alongside ESPhome. It works fine - have never had a situation where I wished I was running the OS/VM version of it instead.

      TBH though, I kinda hate HA; its really kludgy for anything that I’ve wanted to do, and a lot of the presence based stuff seems super flakey. I’m constantly getting notifications about Frigate events when it knows im in my home area & they’re supposed to be silenced.