The bolts for the handle prevent going from top to bottom in one motion across the whole door so I had to adapt. Over time, I’ve become pretty good at removing all the water to prevent streaks when it dries even on the sleepiest of mornings.
The bolts for the handle prevent going from top to bottom in one motion across the whole door so I had to adapt. Over time, I’ve become pretty good at removing all the water to prevent streaks when it dries even on the sleepiest of mornings.
what
is
the system?
I had to think about it…these are the steps for the harder door:
Top right down to the top bolt, swoop counter-clockwise around it the edge.
All the way left to that same bolt, swoop again clockwise, down to the second bolt, swoop counter-clockwise around to the edge.
All the way left to the bottom bolt, another swoop, down to the bottom
For all of this, the squeegee must remain angled to fit between the gap where the doors overlap.
Proceed as normal (top to bottom) for the rest where there are no obstructions.
The other door is the inner door so no fancy moves are required. I can hold the squeegee normally.