cm0002@lemmy.world to 3DPrinting@lemmy.worldEnglish · 11 hours agoThis High-Resolution, Non-Contact Filament Sensor Improves Print Qualitywww.hackster.ioexternal-linkmessage-square7fedilinkarrow-up115arrow-down12
arrow-up113arrow-down1external-linkThis High-Resolution, Non-Contact Filament Sensor Improves Print Qualitywww.hackster.iocm0002@lemmy.world to 3DPrinting@lemmy.worldEnglish · 11 hours agomessage-square7fedilink
minus-squareevidences@lemmy.worldlinkfedilinkEnglisharrow-up1·edit-24 hours agoBeacon and cartographer are both Eddy current sensors and both do nozzle contact probing too. E3d has their Revo PZ with does nozzle contact probing with a peizo sensor if you’re in that ecosystem.
minus-squareevidences@lemmy.worldlinkfedilinkEnglisharrow-up1·47 minutes agoAhh, didn’t know this was a thing
minus-squareExcessShiv@lemmy.dbzer0.comlinkfedilinkEnglisharrow-up1·edit-21 hour agoProperly tuned PA achieves this well enough without the need for the sensor I would say.
Beacon and cartographer are both Eddy current sensors and both do nozzle contact probing too. E3d has their Revo PZ with does nozzle contact probing with a peizo sensor if you’re in that ecosystem.
I mean this
Ahh, didn’t know this was a thing
Properly tuned PA achieves this well enough without the need for the sensor I would say.