I was thinking some transparent filler maybe, and grinding/polishing it down? There’s some varnish on the wood anyway.

  • weeeeum@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    10 hours ago

    You have to remove the varnish by sanding first, then try to iron the floor. There may be poor contact in the middle so try ironing the other edges.

    Other than that, you are gonna have to get new boards installed.

    • sir_pronoun@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      12 minutes ago

      I found a video where they put small holes in the varnish with a knife, then let it sit wet for a couple of hours, then steam it through a towel, and it worked pretty well on a test dent!