As expected, the dedoming lowers CCT and duv. The beam got narrower and now has snowflake-like artifacts around the beam (not visible in the photo).

Here’s a tool I made to unscrew the bezel, if you need one: H150 Bezel Removal Tool

  • DefeaterofDarkness@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Fair point, but there is built in protection that opens the circuit when shorted. It may still pose an issue in certain environments, but the vast majority of users won’t have an issue.

    • potatopotato
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      It doesn’t work on the h300 I have, anything that touches the contacts sparks wildly. I found this out using a pocket knife to remove some lint. It also causes stuff to corrode if it gets sweaty because it’s just plating out material onto the center post and that’s inherent to having the charging circuitry in the cable. It’s a startlingly shit design, I’m not buying anymore USB chargeable lights unless it’s a covered type C port.