For example V rising used to crash my computer after 10-20min every time without exception until I lowered the graphic quality and disabled unlimited FPS (I set it to 60). Now it works without crashing.
I have a Gigabyte Geforce RTX 4090 that should be able to bear the load of the best graphics settings.
I tried doing the same in Valheim, but it keeps crashing particularly inside my megalomanic castle and the surrounding village (which could be part of the problem). But it also likes to crash while doing mundane stuff like walking through a forrest.
I see many other people having the same issues - they have a high end GPU and some games just keep crashing their computers. And as a counter point, my friend has a low end computer and he never had any crashes with V rising or with Valheim.
So my question is what is causing the issues here? Both games are made in Unity. Is the problem in Unity, developers, the GPU or the combination of all?
You must log in or register to comment.
Impossible to debug without access to the system, but one of the first things i think of is insufficient cooling. That also explains why it works fine at lower settings.
I tried looking in the Windows Events but nothing is logged there. Do you have some suggestions what to look for?
I don’t thing the temperatures are the issue here because I monitored the temperatures while playing and it never went above 80 C / 176 F.
And it’s important to note that Valheim keeps crashing even after lowering the graphics.
Sounds like a hardware issue. My first guess would be the power supply. People often overlook it or cheap out when they build their PC
Sounds reasonable and that’s one of the first things people suggest looking into. I’ve seen posts where the problem persists even after buying new PSU, motherboard and CPU.
I strongly suspect that the issue lies in high end GPUs and Unity. What I’m wandering is whether it’s due to some bug in Unity itself or is it related to the developers use of Unity.
Don’t forget V Rising is early access. Also, plenty of modern software has bugs that can cause engine crashes. I wouldn’t jump to conclusions.
It could also be a RAM issue. If your memory is running too fast, it may cause sudden crashes. Check if XMP is enabled (which it should be) and if it is, turn it off. That should run your memory at a slower speed. if the problem persists, then your memory is probably not the issue. If it goes away, your memory may have been poorly binned by the manufacturer and can’t reliably run at full speed.
Sure you can do that as a test, it would not be great to just… accept it. If the problem goes away doing this look into better RAM.
Also, look into stress tests, there’s some for the GPU and for the RAM, this way you can pinpoint where and why the crashes happens.
Given that, please be aware that running such a GPU and needing these kinds of advice is akin to running a Ferrari not knowing it needs gas to run.
Thanks for the advice, I’ll try it out.
This sounds like a build-issue.
RTX 4090 is a very power-hungry GPU, especially on the top end. It can suck down a lot of power, especially if FPS is unlimited and graphics setting are very high.
If your computer ever runs out of power, the computer crashes, even if it loses power for just 5-milliseconds, you’re screwed. Only the beefiest power supplies can power that kind of high-performance load.
