- cross-posted to:
- [email protected]
- cross-posted to:
- [email protected]
cross-posted from: https://lemmy.world/post/190570
Doing it by hand with sandpaper is a nonstarter.
Also I don’t have a lathe :-/
cross-posted from: https://lemmy.world/post/190570
Doing it by hand with sandpaper is a nonstarter.
Also I don’t have a lathe :-/
A 1/2" dowel might fit in the shank of a standard hand drill… If so, I’d use the dowel in the hand drill and would round off the other end against a belt or oscillating sander, basically.