Hello!

Does anyone happen to know anything about this ‘Brandani’ branded gooseneck kettle? I’m hoping to find any original information about it and also to find out if it is stainless steel or some mixture with aluminum.

I’ve failed so far at finding anything online about it.

For context, it took me a few hours of nonconsecutive research to learn the term ‘gooseneck’. So, I’m not the most learned person on the topic.

Any direction or advice is very highly appreciated.

Thank you very much for taking the time to read my post!

  • TheFermentalist@lemm.ee
    5·
    11 days ago

    Brandani is Italian kitchen ware. Generally high quality, always avant garde. I can’t find that particular kettle, but suspect it’s stainless steel.

    Is there a model, or any sort of stamp you can post?

    • vimmiewimmie@lemm.eeOPEnglish
      4·
      11 days ago

      Here is a photo of the base.

      Does it show up? I tried to post a photo in a comment somewhere else and someone commented saying they didn’t see it.

      But this Brandani stamp/labeling is the only marking I saw inside or out.

      Thanks so much for helping.

      • TheFermentalist@lemm.ee
        2·
        11 days ago

        The base doesn’t look like stainless. Stainless steel is hard and doesn’t scratch as easily as aluminium or other alloys.

        • vimmiewimmie@lemm.eeOPEnglish
          1·
          11 days ago

          Oh. So it could be aluminum at least on the base.

          Dang.

          That’s pretty helpful observation. Thank you very much.

  • Imgonnatrythis
    3·
    11 days ago

    Is that considered a gooseneck? Seems like a goose that has a crick perhaps.

    • vimmiewimmie@lemm.eeOPEnglish
      3·
      11 days ago

      Oh shoot. You’re probably correct.

      I don’t know what else to call it. Though, shifting to using that term might have hindered my results for sure.

      Thank you so much.

  • zogrewaste_English
    2·
    10 days ago

    Do magnetic test, put a magnet to it, see if it sticks. If it passes the magnet test, then you know it’s either carbon steel or magnetic stainless. If it fails, you need to find something that is harder than aluminum, but softer than steel, like an actual piece of copper. Scratch someplace out of the way with the soft copper, if the metal is scratched by the copper, you know that the metal is softer than the copper, and that rules out stainless steel. The scratch test isn’t super reliable because some aluminum alloys are significantly harder than copper, but it’s better than nothing If you don’t have chemical tests available.

    Good luck in your search. The Italians used to make quite a few kitchen implements out of aluminum, so it is possible that it is aluminum. I have an old Bialetti Moka that is aluminum.

    • vimmiewimmie@lemm.eeOPEnglish
      1·
      9 days ago

      So, unfortunately it seems to have failed the magnet test. (Had to check what fail and pass were for that lol)

      Interestingly though, the lid of it is magnetic. And I was only using what I had at my friend’s house, which were small basic fridge magnets.

      I read it’s maybe possible it’s still not aluminum just because it didn’t stick to a magnet? I’ve got some stronger magnets at home but it will be a few days still before I can test that.

      And I couldn’t find anything which was pure copper, save for finding and stripping a wire somewhere.

      Thank you very much for your help here. It has been incredibly beneficial for this search.

      I will continue looking for strong magnets just in case, as well as reading where I can to see if anything says what else it could be.

      I may be at the end of what I can do outside of testing a sample of the material itself, but if anything comes to mind at any point, please feel free to toss it here. I’ll be checking back for sure as well as updating with anything I find.

      Thanks again!

      • zogrewaste_English
        1·
        9 days ago

        Not all stainless steel alloys contain enough iron to ferromagnetic, so the magnet test only proved that your lid is ferro. Good luck with it.