No it was a linksys issue. But honestly I just replaced it was an Asus router and called it a day. It’s a nice concept and works well for some people’s use cases. It’s not difficult to implement but to me wasn’t justified.
One of the linksys routers that was advertised to support it, but the radio firmware was not officially supported and I had a lot of wireless connection issues so I replaced it.
DD-WRT has a license agreement and NDA in place with Broadcom that allow usage of better, proprietary, closed source wireless drivers (binary blobs) which they are not allowed to redistribute freely.
Broadcom has not released any FOSS drivers. Broadcom doesn’t support open-source much at all.
Basically bcm doesn’t want people to use opensource.
I believe you mean router, not access point, and you’re still going to want to run it on dedicated hardware for the speed boost and redundancy in your networking configuration.
Double it up with a pihole dns
https://pi-hole.net/
deleted by creator
Yeah which makes sense. If you don’t use custom dns then it’ll use the dns from the VPN provider. It’s more secure by default. 👍
Glad you figured that out.
If your access point supports DD-WRT you can also integrate it there without needing another device.
Join church of OpenWRT
I left that church after my last wrt router that was advertised as being supported wound up in fact not being “completely” supported.
I don’t think you should be soured away from openwrt completely because its built for specific use cases with specifc routers
And open source coders can’t reasonably create individual openwrt firmware versions for every router out there that quickly
No it was a linksys issue. But honestly I just replaced it was an Asus router and called it a day. It’s a nice concept and works well for some people’s use cases. It’s not difficult to implement but to me wasn’t justified.
Can you provide more info what router, what features and from where info?
One of the linksys routers that was advertised to support it, but the radio firmware was not officially supported and I had a lot of wireless connection issues so I replaced it.
Info from official openwrt website.
Mediatek? Certanly not Atheros. What model?
AC3200 I believe
https://openwrt.org/inbox/toh/asus/asus_rt-ac3200_r2.34
It says in bold red not supported. Not surprising for Broadcom.
https://forum.openwrt.org/t/porting-asus-rt-ac3200-my-experience/65643
Seems what you said. Broadcom wifi chip code.
https://openwrt.org/meta/infobox/broadcom_wifi
Basically bcm doesn’t want people to use opensource.
I believe you mean router, not access point, and you’re still going to want to run it on dedicated hardware for the speed boost and redundancy in your networking configuration.