EDIT in the end, I settled on an Audient iD24, managed to get one from Juno for around £250
As per title… and to clarify, I don’t just mean a headphone port, I mean an internal bus separate from the main outs, that can be seleCubase. This info doesn’t seem to be present on the manufacturer’s blurb; I’ve just been stung buying a Presonus 24c which it turns out only has ‘Main Out L / R’.
Presonus support solution is to use their DAW, I am already fluent in Cubase / Ableton and have no desire to learn a third (StudioOne)! My main interface at home is a UAD Apollo which has main outs, virtual busses, and a headphone bus. I wanted to get a different interface for live stuff & travelling.
Obviously UAD is a higher tier than the £150 24c so perhaps I was expecting too much from it. I need an interface with headphone bus as I use that to run Slate VSX (headphone software).
Thanks very much for the suggestion, I’ve just been on with support @ Audient and they recommended the id14 / 24. Said it’s possible with the 14, but might be better off with the 24 as it has more flexible routing options for the 'phones. I’ve had a few suggestions for the Saffire so will give them a shout too and see how their setup works.