• omgarm@feddit.nl
    link
    fedilink
    arrow-up
    18
    ·
    1 year ago

    What am I gonna do with 1 GB? I just close the door on my WiFi point with one open socket to create a high WiFi pressure zone. If you close your windows it lasts like a day.

    • XIN@lemm.ee
      link
      fedilink
      arrow-up
      14
      ·
      1 year ago

      That’s called data compression and it wasn’t supported until wifi 5, it wasn’t efficient until wifi 6. It requires 5ghz.

  • slazer2au@lemmy.world
    link
    fedilink
    arrow-up
    12
    ·
    1 year ago

    I like your idea but you are limited to 100M or 300ft, let’s scale it up. Single mode fibre can do up to 400Gb per strand pair up to 40km (I’m not converting that to freedom units)

    Get yourself a 144 core cable or 72 pairs.
    40Km of cable for a total length of 2,880Km of fibre and at 400Gb per meter that is just over 1,000,000 Gb or 1 petabit. 8 bits to a byte for a total cable capacity of 140 terrabytes of data.

  • rektifier
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    To allow the cable to work as a delay line memory, be sure to plug both ends into the router.

  • CrayonRosary@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    1 year ago

    I really don’t like that you have two units in your title. A spool is a unit, although a crude one. Your title would be much easier to read if you had simply said, “Network cable can hold 1GB of internet traffic per meter.”

      • CrayonRosary@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        edit-2
        1 year ago

        No, you’re right. It is, but your title was a little redundant.

        Think of it this way. You could have said, “A planet of warehouses of pallets of spools of cable holds 1 GB per meter…” It’s still a correct statement, but it’s redundant. Any amount of cable holds 1 GB per meter. You don’t need to say an amount at all.