Hello everyone,

As the title says, I would like to move from 6mm drop to 0mm. I already occasionally run with 0mm trail shoes but I mostly run with 6mm road shoes. I saw some guides where people moved from 12 to 8 to 4 to 0. I am unsure if I can jump from 6 to 0 or if it is best to got to 4 and then 0. What do you think ?

Thanks :)

  • Superachromat@lemmy.world
    link
    fedilink
    arrow-up
    4
    arrow-down
    1
    ·
    1 year ago

    I suppose you could try to blend in the 0mm drop shoe slowly, starting from shorter runs, and see how it feels. In any case, the drop measurement is a static measurement and in action the drop “feel” depends on how compliant the midsole is (softer foam means more deviation from “on paper” drop specification)

  • LowHangingFruit@laguna.chat
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    I think you can skip it and go straight to 0. You should just be careful for a few runs, because your calves will have to do more work then they used to. And don’t forget to do a proper stretching before run. I personally do a static stretch after 10 minutes of warm up.

  • johanml@vlemmy.net
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Perhaps provocative, but what is your goal with going to 0mm? I’m mostly on zero or <6mm drop but I’m mixing amounts of stack height.

    • TheBatzOP
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Good question! I might be wrong, but I feel that by having 0 drop I rely less on the gear and more on my legs. I was also told that it seems to reduce the risk of injury as most of the shocks are absorbed by the muscles instead of the Although I will probably have some drop for long road runs such as marathons.