help-circle
  • IHeartBadCode
    link
    fedilink
    759 months ago

    4.2 K (-269⁰C) and 3,695 K (3,422⁰C) respectively for those wondering.

  • @[email protected]
    link
    fedilink
    369 months ago

    I got a thermostatic shower mixer from ikea and it’s awsome. Just set your preffered temp and it will make sure it stays that way. It wasn’t even that expensive. I wish more people knew about it.

    • @[email protected]
      cake
      link
      fedilink
      English
      199 months ago

      Problem is that shower temperature is one of those problems that is enough to be annoying but not enough to demand being solved.

      Didn’t know about thermostatic mixers. Thanks.

    • @[email protected]
      link
      fedilink
      49 months ago

      Arent’t these standard everywhere? These things are super common here in Europe.

      • @[email protected]
        link
        fedilink
        21
        edit-2
        9 months ago

        Europe is not one homogenous continent. Here in Europe where I am they are not common, and I’ve been to at least 2 other countries here in Euorpe where these mixers were not common.

        • @CareHare
          link
          19 months ago

          Okay fair point. I think I’ve seen them, not everywhere mind you, but certainly encountered them in at least twelve countries here in Europe. So they’re certainly wide spread.

      • @[email protected]
        link
        fedilink
        English
        19 months ago

        Trust me, there are still many households with three super old two knobs style. It’s just impossible to get a usable temperature with them.

    • @[email protected]
      link
      fedilink
      English
      39 months ago

      I got mine from Aldi for 40€. It works perfectly and turns easier than some of the expensive models at my friend’s house.

      • @[email protected]
        link
        fedilink
        29 months ago

        I found cheaper options too, but decided to go with ikea because they offer replacement ceramic cartrige which is apparently the only thing that can break on these mixers.

  • @Radium
    link
    English
    249 months ago

    You might want to have the mixing gasket replaced in your shower. It’s responsible for mixing hot and cold water in your shower and can be the culprit of your shower being too hot or too cold. They have a limited lifespan and need to be replaced eventually

    • @[email protected]
      link
      fedilink
      109 months ago

      top 10 lemmy comments to save for later number one:

    • @[email protected]
      link
      fedilink
      69 months ago

      This makes a lot of sense because my shower is too cold Right untill last half inch of motion Then is goes to too hot

    • @[email protected]
      link
      fedilink
      129 months ago

      I was in a doom metal band call Melty Melty Bones. We had to call it quits because it turned out that our music rumbled at a frequency that caused osteoporosis.

      • Kit Sorens
        link
        fedilink
        English
        49 months ago

        Is this a joke or the craziest thing I’ve never heard. Is that like the brown note or something?

        • @[email protected]
          link
          fedilink
          29 months ago

          Just a joke on the name fitting the music but yeah, that WOULD be fucking crazy! 😄

  • @[email protected]
    link
    fedilink
    149 months ago

    My shower has its own favorite temperature and will slowly readjust itself to it.

  • MrJukes
    link
    fedilink
    129 months ago

    Get out of my shower!

  • tiredofsametab
    link
    fedilink
    119 months ago

    Japanese showers for the win: temperature is written right there on the nob for many.

    • @[email protected]
      link
      fedilink
      69 months ago

      Isn’t there a physical limit to solving this problem? For me the problem is typically, that the water in the hot pipe has cooled down, so the first few seconds/half a minute it slowly rises in temperature until finally the pump of the boiler sets in to pump actually hot water back into the system. Only then can I reliably find a temperature mix that stays stable.

    • @[email protected]
      cake
      link
      fedilink
      English
      49 months ago

      Mine is digital. Just set to desired temp and power and away you go.

  • @[email protected]
    link
    fedilink
    39 months ago

    And when you get it right, it oscillates between nice and somewhat cold :(.