• 0235@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    I have had cardboard spools for a while. I am on the fence. They are much easier to recycle (no matter how many 1million and 1 uses for plastic spools exist). however they creak horribly on my spool holder, and are much larger than most of the similar weight poly spools i have, so i had to create bespoke spool holders for all 3 printers i have!

    • valeen@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      They don’t seem to work very well with the AMS system from Bambu. Good news is can occasionally transplant them to a reusable (and printable too) spool.

      • 0235@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        This is what I sometimes do, transfer a bit of filament to a mini roll. There are a few decent files out there for re-spooling out there.

        As environmental shakey 3d printing is, I am happy to be inconvenienced by cardboard spools, as that is one disposable things we can make not-plastic.

        • valeen@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          One interesting use for the ams system is automatic filament switching for when you want to finish a spool that has ??? Kg of filament left and you need a print to finish over night. Throw the questionable one in slot one and the new one in slot two, tell they system they are they same and it will switch over on run out.