This is misleadingly reductionist. California high speed rail has made consistant progess in that time. That progress has been slower than ourslowest expectations. It demonstrates the void of expertise the US has in rail megaprojects. However, that expertise is being built, slowly and painfully. Its still forward progress for a nation which tore up half its rail overthe last 50 years.
With 0.92% of electrified rail it’s a joke to say that NGL.
Absolute numbers are meaningless.
You have to see it into perspective per area then you’ll get to feel how dense and therefore useful the rail network actually is. Because what good is a rail network if you can’t reach your desired location.
And then you’ll see that swiss, Germany and Luxembourg for example end up with less than 10 square km per km of rail while the usa has around 40.
Okay, but the comment implied America doesn’t have the expertise to build a passenger network when it actually doesn’t have the political willpower. It has the expertise to spare, but no one in power actually cares.
Planning a high speed high throughput flexible passenger rail network is a whole different beast than laying non-electrified single track lines in a straight line through the middle of nowhere that basically only serves the occasional 2miles long freight train.
The parameters are vastly different and almost incomparable. And America has decidedly no expertise left in the former.
Other than the fact that there are several American firms who have already done it, and even if there was a knowledge deficit it’s the easiest thing in the world for an American company to headhunt foreign talent. Too easy in most industries.
Opposition to new railways is political, be it from establishment organizations or private owners, like in California. That’s all there is to it.
Which ones? Which company actually has put out a consistent, significant, structurally sound high speed rail network including stations and the trains themselves that is based in the US?
And headhunting foreign talent tells me that you have not worked in the rail planning sector. These companies are extraordinarily protective of their high value who are the executive “talent” behind their stuff. And the biggest rail tech companies are multinational conglomerates (Alstombardier, Siemens, CRRC, Hitachi) who have no desire or need to outsource to America.
There is noone currently who has both intimate knowledge of American geodetic planning and high stress track planning. And building that knowledge takes a lot of trial and error.
While their current average speed isn’t great compared to the highest speed rails in Europe and Asia, it is comparable to the average high speed services, and Amtrak seems confident in their claims for Acela in 2024.
Just so we’re on the same level here - your own article states that high speed rail as it is most commonly referred to means speeds of above at least 200km/h, more commonly beyond 250. Lower speeds are “higher speed rail” in America, or regional/local lines in Europe. My local lowest tier urban mass transit has a normal speed of 160km/h.
America has ONE Line with speeds beyond 250, and that is where all except one of its 200+ speeds lie aswell. That is, sorry, a joke. For one line a network does not make.
Look at that same graphic in the article on the high speed network in Europe and tell me they are even close to comparable.
— The new train sets are like 3 years behind schedule and they’re still working out issues. The current schedule is to deploy in 2024
— yes, the new train sets have a higher top speed…. for the 49 miles of track that currently support that. Amtrak are spending billions every year to upgrade more track, but that’s much longer term than most of us expect
Thats true. And then America stopped. And then the people who had actual on-the-ground experiance died of old age. Its really another effect of the slow tragedy that is the auto industry
According to the documentary Hell on Wheels it was mostly built by a man named Cullen Bohannon with his own hands. When he got tired, he used some Chinamen and I think maybe a woman dressed as a man for a stretch.
California HSR expansion is going to get cancelled the moment the minimum viable route finishes, they’re going to lose the ROW and the expertise, then 10 years later the next leg will get approved.
This is what happens to transit projects in America, so there’s no reason to expect anything different for rail.
This is misleadingly reductionist. California high speed rail has made consistant progess in that time. That progress has been slower than ourslowest expectations. It demonstrates the void of expertise the US has in rail megaprojects. However, that expertise is being built, slowly and painfully. Its still forward progress for a nation which tore up half its rail overthe last 50 years.
America invented rail megaprojects.
America still has the largest rail network by far. It’s well more than twice the size of China’s.
The only interesting note is that it’s almost all freight compared to other nations’ use of passenger rail.
Hehehehe
With 0.92% of electrified rail it’s a joke to say that NGL. Absolute numbers are meaningless.
You have to see it into perspective per area then you’ll get to feel how dense and therefore useful the rail network actually is. Because what good is a rail network if you can’t reach your desired location.
And then you’ll see that swiss, Germany and Luxembourg for example end up with less than 10 square km per km of rail while the usa has around 40.
Okay, but the comment implied America doesn’t have the expertise to build a passenger network when it actually doesn’t have the political willpower. It has the expertise to spare, but no one in power actually cares.
That still is not correct.
Planning a high speed high throughput flexible passenger rail network is a whole different beast than laying non-electrified single track lines in a straight line through the middle of nowhere that basically only serves the occasional 2miles long freight train.
The parameters are vastly different and almost incomparable. And America has decidedly no expertise left in the former.
Other than the fact that there are several American firms who have already done it, and even if there was a knowledge deficit it’s the easiest thing in the world for an American company to headhunt foreign talent. Too easy in most industries.
Opposition to new railways is political, be it from establishment organizations or private owners, like in California. That’s all there is to it.
Which ones? Which company actually has put out a consistent, significant, structurally sound high speed rail network including stations and the trains themselves that is based in the US?
And headhunting foreign talent tells me that you have not worked in the rail planning sector. These companies are extraordinarily protective of their high value who are the executive “talent” behind their stuff. And the biggest rail tech companies are multinational conglomerates (Alstombardier, Siemens, CRRC, Hitachi) who have no desire or need to outsource to America.
There is noone currently who has both intimate knowledge of American geodetic planning and high stress track planning. And building that knowledge takes a lot of trial and error.
https://en.m.wikipedia.org/wiki/High-speed_rail_in_the_United_States
While their current average speed isn’t great compared to the highest speed rails in Europe and Asia, it is comparable to the average high speed services, and Amtrak seems confident in their claims for Acela in 2024.
Just so we’re on the same level here - your own article states that high speed rail as it is most commonly referred to means speeds of above at least 200km/h, more commonly beyond 250. Lower speeds are “higher speed rail” in America, or regional/local lines in Europe. My local lowest tier urban mass transit has a normal speed of 160km/h.
America has ONE Line with speeds beyond 250, and that is where all except one of its 200+ speeds lie aswell. That is, sorry, a joke. For one line a network does not make.
Look at that same graphic in the article on the high speed network in Europe and tell me they are even close to comparable.
In which claims are they confident?
— The new train sets are like 3 years behind schedule and they’re still working out issues. The current schedule is to deploy in 2024
— yes, the new train sets have a higher top speed…. for the 49 miles of track that currently support that. Amtrak are spending billions every year to upgrade more track, but that’s much longer term than most of us expect
— here’s a more realistic example of what they need to deal with: $6B for a 12 year project to replace a 150 year old tunnel, and the new track will still be slow. https://media.amtrak.com/2023/03/amtrak-begins-bp-tunnel-replacement-program-work/
Same goes for the meme tbqh
Thats true. And then America stopped. And then the people who had actual on-the-ground experiance died of old age. Its really another effect of the slow tragedy that is the auto industry
Yeah, but who BUILT our rail system?
Like many other things, we don’t like to talk about it…
According to the documentary Hell on Wheels it was mostly built by a man named Cullen Bohannon with his own hands. When he got tired, he used some Chinamen and I think maybe a woman dressed as a man for a stretch.
Also, Dude, Chinamen is not the preferred nomenclature.
It was when Cullen Bohannon single handedly constructed the Union Pacific Railroad in 1865.
Misleadingly reductionist is what /c/memes should be renamed to.
Indeed. We’re fixing the great car mistake at a glacialy slow pace
California HSR expansion is going to get cancelled the moment the minimum viable route finishes, they’re going to lose the ROW and the expertise, then 10 years later the next leg will get approved.
This is what happens to transit projects in America, so there’s no reason to expect anything different for rail.
What evidence is there for you to assert that expertise is being built?