Hey.
Just upgraded my cooler from noctua redux to deepcool ls720 SE AIO for my 13600k and installed thermal right contact frame. But the temperature in cinebench still somehow hitting 100°C.
I haven’t touched anything in bios except xmp.
Room temperature 32°C
Idle temps went from 45°C to 38°C
Gaming temps (mainly cs2) went from around 70-85°C to 55-70°C
Back with the air cooler I was getting lower and lower Score each run of cinebench but now the lower I get even after several runs never below 23k mark and the first run score got boosted by around 1000 point even though the CPU is hitting 100°C.
Here is a screenshot with the current temps am getting in the middle of running cinebench.
System specs:
Rtx 2070 super 13600k 2x8 ddr4 3600mhz Asus tuf b760m gaming plus d4
Running the AIO front mount with fans as intake and 3 top fans as exhaust and 1 back fan as exhaust.
So are those behavior normal during gaming and cinebench?
It’s an Asus tuf b760m. So what do you suggest force power limits to default tdp or undervolt or both ?
you should show what core voltage under load in Hwinfo64 or aida64
and 10sec of AIDA FPU to show power usage
Cant undervolt (much) in b series boards since it leads to performance degradation due to IA CEP. You need a z series board for that. Best you can do is lower pl1,pl2 to ~181w. Could try a bit less and see where performance starts to drop.
So NR200P Max here with 13600k & b760-i bios 1205
The microcode settings is under F7 Advanced Mode -> TAB: AI Tweaker -> select Tweakers Paradies -> Switch Microcode
There you can select 0x104 Microcode
What i also changed is under AI Tweaker the following two selections:
Global Core SVID Voltage from Auto to Offset Mode
• Offset Mode Sign: -
• Offset Voltage: 0.15000
Cache SVID Voltage from Auto to Offset Mode
• Offset Mode Sign: -
• Offset Voltage: 0.15000
Cinebench 24100 pts ~ 152 Watt ~ 82 (few cores hit the max Temp of 89/90)
Hope i could help you guys out