• SamOP
      link
      fedilink
      English
      arrow-up
      11
      ·
      1 year ago

      Hah, you’re not kidding that’s quite similar!

  • ignitionnight@lemmy.world
    link
    fedilink
    English
    arrow-up
    13
    ·
    edit-2
    1 year ago

    All that great work and your electrical connection is an extension cord? Any plans for integrating it into the shed?

    Edit: I could have definitely asked that in a less shitty way, sorry.

    • SamOP
      link
      fedilink
      English
      arrow-up
      7
      ·
      1 year ago

      This was while the electrical was still being hooked into the shed. I trenched in two conduits with cat6 Ethernet in one and one 20 amp and one 30 amp in the other. There are a few outlets inside running off the 20 amp circuit, as well as interior and exterior lighting, and a switched exterior weatherproof outlet. The 30 amp powers a single outlet for the space heater, which is entirely overkill for my 1800W space heater.

        • SamOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I don’t have any 100% pictures cause I completed it at the same as my wife had our second baby and then started a new job at basically the same time and it was immediately a total mess.

    • astraeus@programming.dev
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 year ago

      I’m sure the plan is to eventually hook it up with power, air conditioning is gonna be a must in there. When you finish something like this up, you really want to try it out and show it off. It’s a great build so far

      • ignitionnight@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Title made me think he was finished and didn’t see any electrical boxes. I didn’t notice the missing door frame, baseboards, and window finishing which would have made it obvious this project isn’t finished.

    • SamOP
      link
      fedilink
      English
      arrow-up
      7
      ·
      1 year ago

      It’s a VWINDESK, not sure what model or if they’re still in business. I’ve had it for a couple years now and I like it. It is strong enough to raise and lower with me (heavy) on top of it.

        • SamOP
          link
          fedilink
          English
          arrow-up
          3
          ·
          1 year ago

          When it’s fully upright yeah it wobbles a bit but I don’t mind it really.

        • SamOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          Essentially if it doesn’t Have four legs it will wobble when in standing position. The four leg desks need four hydraulic lifts instead of two so they’re quite a bit more expensive so I went with one with two center mounted lifts.

    • SamOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      It’s LVP and pretty silent. This brand has a sort of honeycomb rubber backing that makes it all quite stable.

    • SamOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Tuffshed installs the shed as some modular walls bare stud with siding and roofing basically. I did everything after that other than the sheet rock.