Outside house lights are controlled by two 3-way switches. One is inside the house and the other in the garage. The garage switch is the normal toggle switch. But inside is this decorator sideways switch. In the two decorator switches…one is the 3-way for the outside and the other is a 2-way for the foyer.
Looking for suggestions to automate the outside lights.
For 3-way switches inside, I’ve used the Lutron Caseta dimmer switch and Pico remote. I obviously can’t fit the Caseta dimmer in this sideways setup and if I install the smart switch in the garage, the Pico doesn’t fit the sideways either.
Make it a 2-gang box and then you can separate the switches.
Or if you want to keep it a single gang opening, automate the master side of the 3-way as well as the garage light. Then you could make the switch location in the picture a 2-Button keypad (one button for each load).
That’s how I would do it in Crestron, I’m not sure what keypad options Lutron has.