does anyone know if its possible to switch between my integrated (ryzen 7700) and dedicated (rx6800xt) on arch? i want to automate this with a little script (which tries to detect games for example) for less powerusage on my desktop pc

    • INeedMana@lemmy.world
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      I’ve also found this article that doesn’t add nvidia to the mix. But in general it seems to work the same for both as long as you have the drivers proper for your hardware installed

  • LeTak@lemm.ee
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    Isn’t the GPU used for the application defined by the monitor it is opened on and on which GPU this monitor is then connected to?

    • Y2K38@lemmy.oneOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I don’t know, could be. But I don’t want to always put the monitor cables into another port. I thought there maybe could be a software way to do this or only use the GPU for the really intense tasks.

  • _cnt0
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    When using open source drivers offloading should be automatic depending on demand. You can make it explicit with DRI_PRIME=0 or DRI_PRIME=1. You’ll have to check which is which.

  • TerkErJerbs@lemm.ee
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    OP is it the 7700 non-x 65w tdp version? Asking because I’m thinking about upgrading my CPU from 5600x to the 7700non-x and have the same gpu. I was actually wondering how throwing that integrated graphics into the mix would work so thanks for asking this and looking forward to your findings if you don’t mind posting however you end up solving this.

    • Y2K38@lemmy.oneOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Yes, I have the non x version. I think the one with x has a higher tdp. I’ll probably look into this this weekend. Hopefully, I’ll find something out that’s helpful to you.