• 2 Posts
  • 148 Comments
Joined 1 year ago
cake
Cake day: July 28th, 2023

help-circle
  • This. Nothing is more difficult than understanding someone’s else code and architecture, and even if you manage that, you’re now stucked with the choices somebody else made and nobody wants that (we want to make our terrible choices!).

    More than a final app, the best thing to publish as FOSS is libraries extracted from it to help other developers build there own products faster. That’s something other may want to maintain when we abandon it. And on top of that, it still help to publish your app using this lib to serve as practical example about how to use your it, of course.






  • AnafrojtoSelfhosted@lemmy.worldCost-cutting tips?
    link
    fedilink
    English
    arrow-up
    8
    ·
    edit-2
    1 year ago

    That’s the same thing. :) If you reduce computing load, you reduce the need for costly hardware and you reduce the need for energy, thus you reduce the amount of money needed to build and run your setup. There’s a saying in (software) engineering : “reducing energy consumption and increasing performances requires the same optimizations”. Make your code faster (by itself, not by buffing up hardware) and it consumes less energy. Make your application simpler, and it will run faster, and it will consume less energy. It’s not an absolute truth (it sometimes happen that you make your code faster and it consumes more energy), but it’s true most of the time.


  • AnafrojtoSelfhosted@lemmy.worldCost-cutting tips?
    link
    fedilink
    English
    arrow-up
    16
    ·
    edit-2
    1 year ago

    Basically, yes. You can configure most cron programs to mail task output to you (it’s usually done by setting the MAILTO variable in the crontab, provided sendmail is available on your system).

    I use that to do things like:

    0 9 11 10 * echo 'lunch with John Doe at 12:20'
    

    It sends me a mail, and I can see the upcoming events with crontab -l. If it’s not a recurring event, I then delete the rule.


  • AnafrojtoSelfhosted@lemmy.worldCost-cutting tips?
    link
    fedilink
    English
    arrow-up
    26
    arrow-down
    2
    ·
    1 year ago

    My favorite cost cutting tip is to avoid big webapps running on docker, and instead do with small UNIX utilities (cron instead of a calendar, text files instead of note taking app, rsync instead of a filehosting dropbox-like app, simple static webserver for file sharing, etc). This allows me to run my server on a simple Raspberry Pi, with less than 500mb of used RAM in average, and mininal energy consumption. So, total cost of the setup:

    • Raspberry Pi : 77€ x 2 = 144€ (I bought two to have a backup if the first one fails)
    • MicroSD 64gb : 13€ x 2 = 26€ (main and backup)
    • average energy consumption : 0.41€ (2kWh) per month

    With that, I run all services I need on a single machine, and I have a backup plan for recovery of both hardware and software.

    Getting used to a UNIX shell and to UNIX philosophy can take some time, but it’s very rewarding in making everything more simple (thus more efficient).


  • I have both a resin printer and a FDM printer, I can confirm the price difference exists, but is not prohibitive (resin is about 2x PLA). The difference of quality is mind blowing, though (in favor of resin printer). If you’re building an army, I assume you will have many pieces? If so, the difference of printing time is also mind blowing in favor of resin printer. The reason for that being that if you print 10x the same mini on your build surface, with FDM it will take 10x the same time as a single mini (the printing head must move to cover each point) while with the MSLA (resin printer), it will take… 1x the same time. That’s because each layer is flashed from a PNG image, so all points of a layer are created at the same time. On top of that, there are things you can do with resin that you just can’t with FDM, especially because of supports needed for hanging parts : if your character has arms, chances are the hand will be lower than the shoulder, which means than when printing from bottom to top, the hand won’t be connected to the body until printing reaches the shoulder, so you need something to support it (a “tower” under the hand, that you will cut off). It’s easy to do with resin, because in a bath of dense liquid, Archimedes is your friend and you can build the support in wild angles, but it’s way more difficult in thin air (with a FDM).

    An other thing to know, though, is that resin printing is way more messy. You will manipulate toxic products, that you can’t throw in the sink, you need gear to cover your hands and face, and resin ends up everywhere and is near impossible to clean. But it’s worth it, especially if you’re into minis. :) FDM, on the other hand, is unbeatable for functional prints (because those resin prints are damn fragile, and tend to not be perfectly at the scale you designed).


  • Anafrojto3DPrinting@lemmy.worldModernizing an Ender 3
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    1 year ago

    Oh, I see. Yes, that may very well be a matter of point of view. For me, modding the printer is part of the fun, not something I do to try desperately to stay on the cutting edge. :) The RepRap dream of “printers that can reproduce themselves” never fully materialized, but modding is the next best thing.


  • Anafrojto3DPrinting@lemmy.worldModernizing an Ender 3
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Are they still sold, anyway? I mean, sure, someone who has no printer should buy a more recent one. But that was not the subject, here : the question was if it was needed to replace an Ender 3. I certainly would not, personally, it would be throwing out a perfectly good printer for incremental upgrades. Of course, it depends on the usage. For someone who uses their printer professionally to serially print all day, sure, it’s probably worth it upgrading. Me? I really don’t care if my prints are slower. I really don’t find the Ender 3 hard to get a print right either. But I’ve been printing since the wooden Printrbot Simple about a decade ago, maybe I’m just used to it.


  • I’m using a pi4 8gb as my server, with a pi4 2gb as backup in case the first one dies. It’s a very classic server, running postfix/courier-imap for mails, lighttpd for web, bind9 for dns, ergo for irc, sqlite3 for databases. I also use fail2ban for IDS and cron to run tons of various task. All of that is hosted on a Gentoo linux OS.

    The one thing I don’t want to use is docker. I love docker for development or for deploying the main app at work, but it makes managing updates a nightmare for handling multiple services on my server (most your containers probably contain vulnerable software due to lack of system updates), and it eats resources needlessly. Then again, it’s made possible because I avoid the big webapps that usually need it.


  • At the very least, it means the CEO doesn’t understand the domain. It may be because he sees this part of the business as secondary and less important, or because it was developed so fast he didn’t have time to grasp the concepts, probably he was not a driving force in that effort. I certainly hope the tech side is more aware. Without more proof of CEO implication, I certainly would not bet on that horse to survive in the distant future, though.


  • “Git hosting” would be more appropriate. Unless that by frontend, you mean specifically web frontend, but that would be weird, because forges also provide the web backend part.

    Sourceforge was the biggest FOSS host in the 2000s, before GitHub (mainly because there was not much centralization to begin with). That train is long gone. :) Sure, the name and website Sourceforge still exist. Myspace, Digg and Yahoo do too. They are basically web ghosts, only an echo of what they once were.



  • Actually, I do use git bare repos for CD too. :) The ROOT/hooks/post-update executable can be anything, which allows to go wild : on my laptop, a push to a bare repos triggers deploy to all the machines needing it (on local or remote networks), by pushing through ssh to other bare repos hosted there, which builds and installs locally, given they all have their own post-update scripts ; all of that thanks to a git push and scripts at the proper paths. I don’t think any forge could do it more conveniently.

    For me the main interest of forges is to publish my code and get it discovered (before GitHub, getting people to find your repos hosted on your blog’s server was a nightmare). Even for the collaboration, I could do with emails. That being said, most people aren’t on top of their inbox, in which mails from family are mixed with work mails and commercial spam in one giant pile of unread items, so it’s a good thing for them we have those issue trackers.