Looks like this shows it working with both joycons on a miniature laptop on the ns1 https://youtube.com/watch?v=aJU606gw-NM&pp=ygUVbWFnaWMgbnMgMiBqb3ljb25zIHBj

From the comments under the video these look to be the instructions to pairing both joycons to it

HERE IS WHAT YOU ACTUALLY DO:

1: Go to the Green mode.

2:Press the button once or twice untill the green led on the mayflash blinks really fast.

3:Hold the power button and the “hidden bumper thingy button” that is FURTHEST away from the controller until the controller either stops blinking or resets the lights. Do this for the one of the two controllers.

4:Repeat step 2 and 3 for the other controller (as in press the mayflash button until it blinks really fast), you will notice that the paired controller has shutdown and you can now do 3 to pair the other controller.

5:Press the mayflash button 2 times again so that it goes into fast blinking ( now all controllers have shutdown ).

6:While blinking press the power button on the LEFT joycon. Wait for it to pair with a solid green LED.

7:The mayflash must be now solid green and the left joycon too with the right NOT connected. GOOD … just press the mayflash button again so that it goes into SLOW BLINK and when it does hit any button on the RIGHT joycon AND IT WILL PAIR AT THE SAME TIME AS THE LEFT. CONGRATS

Apparently you can’t with the 8bitdo adapter (sorry made last post while half asleep) meant to link the mayflash NS2 which actually can pair both joycons

will link that here and change previous link in case someone comes across it later

You can use the Joycons with a PC using One of these

Unfortunately that is fairly normal for gaming laptops on the heating and battery life, for the price though it does seem tough to beat at least if you are set on a laptop instead of a desktop

You can also turn off the dedicated GPU generally to save on battery life when you aren’t gaming on it

Looks like this has what you need

https://nomanssky.fandom.com/wiki/Base_building

Looks like if you are lucky it might still be usable according to this diagram

https://www.researchgate.net/profile/Sherline-Jesie/publication/306236972/figure/fig6/AS:395982866010116@1471421080865/Block-Diagram-of-Micro-SD-card.png

The biggest difference is even when using dirty energy source electrice vehicles are more efficient at using the electricity from the dirty sources than gas engines are at burning gasoline directly

https://www.fueleconomy.gov/feg/evtech.shtml

Local anasthetic?

Pocketcasts is open source

https://github.com/Automattic/pocket-casts-android

It just isn’t free (although might be able to get premium features if you build from source not 100% sure on that one)

Liftoff has an all instance view you can enable if that is what you are looking for and don’t mind using an app

Any chance you don’t have english and undetermined set as your languages?

If so that might be the cause

The url’s above should be correct

I had to be logged in to find it on my instance otherwise it only showed your comment when I searched it

I logged out specifically to test but since I don’t have an account on your instance I can’t guarantee the same results I have gotten

Actually I just got it to pull up without being logged in on your instance

Based on the url you pasted in it looks like you are trying to sort to communities, currently the communities sort is broken

You will need to sort by all and the copy in [email protected] or if that doesn’t work you can also try copying in https://lemmy.ml/c/kde

Might try just logging in, I have heard several people say that they didn’t get an email from the server they signed up for but when they went to sign in, it let them

No problem :)

Currently I am really liking liftoff although the ui can be a bit odd such as the notification bell only being in the posts section before you scroll down and not having an inbox in your profile instead

You can already do this from your user settings and it should apply to wefwef IIRC

Although it looks like wefwef doesn’t have the user settings section so you would have to set the option from the user settings on your instance to have it apply

Ah I see so there is…

Wasn’t expecting it to be in the posts section but that does indeed work

RPCS3 would be your option in that direction

Last I heard they were working on an app for tildes instead, although they might get around to lemmy eventually