I think xournal++ has a journal background to handwrite music

That’s so cool, I almost forgot this game had a PC version. I uses to play it a lot as a kid, but I only 109%'ed it a coupleof years ago on the Wii. I guess it runs using Proton?

In the last few months I haven’t run a lot because of the weather (hot and humid) and because of a crap ton of uni work for my thesis. Yesterday I finally managed to run a 10k after literally months. With respect to my usual form it was terrible, i run a 6:10min/km when usually I’m well below 5:45, but considering I had run like twice in the past month and a half and had been months since my last 10k I’d say it was a good result

I started using OpenTracks a couple years ago and ditched runtastic (i keep calling that, it’s been adidas running for ages) when I discovered it made my runs public, with gps data and all, for the social features of their app. OpenTracks is FOSS, I got it from fdroid, the data stays on your phone, you do what you want with it. And most importantly it only tracks your activity, just that, no social media crap.

Then again if you don’t want to track your runs just don’t, I personally do it because I like to see my progression and to keep notes to myself on how/what/when i eat/sleep/etc effects my runs and stuff like that

In realtà anche codici e algoritmi sono brevettabili. Il caso che mi viene in mente è quello del Perlin Noise (vedi anche il Simplex Noise). Mi vengono in mente anche i vari codec video/audio tipo h264, per il cui uso si deve pagare la licenza. Su quest’ultimo sono meno sicuro riguardo lo stato del brevetto però.

Why not both

Was it in “Ubik” that people had to pay a fee every time they wanted to use their domestic appliances or even open the door to their own house?

Not one in particular, just the first thing that came to mind since I use it a lot on linux. I even use NewPipe on android, didn’t even remember it had an option to download

yt-dlp inside termux?

Baikal works wonders

Nah 85/90 degrees is perfect for the job. Much better and more uniform than a heatgun, let alone a hairdryer

Is that a motorola moto z2 play? I owned that phone and I used to disassemble it just like this!

Edit: saw in another comment that it’s a z4. The camera did look strange for a z2 at a second glance

While I don’t remember his name, I remember there was a Darknet Diaries episode about the researcher who first investigated the problem. The episode was very thorough, I liked it a lot. I also don’t remember the name of the episode, so I guess this comment is kinda useless

I second this

Also dumbest idea, have you tried a brand new spool of PLA? Just to exclude an incredibly wet filament. Because that can cause all sorts of problems

Hello, I suggested heat creep in your last post, which didn’t end up being the issue. I don’t remember if anyone suggested it, but have you tried checking the bowden assembly, on the motor side? Whether the stepper works, or the gears wore down (I’m pointing towards this), or there are clogs somewhere in the mechanism, even some dust that accumulated where it shouldn’t had. Or did you change settings like the current limit on the steppers? If that’s controlled with a potentiometer on the main board, maybe it got turned down for some reason (if so, I’d try to understand why’s that). I don’t know how Klipper handles motor drivers where current limits are controlled in software, I know that Marlin has a dedicated submenu in the Configuration>Advanced Configuration. If you reflashed the firmware, maybe the settings where in the eeprom and did not get transfered over or got overwritten in the flashing process.

I remembered that on a couple different printers I had the same problem as you, and it came down to damaged/untightened nozzles (which you excluded already) or wore down gears or, on the printer I’m working on right now, too low current limits which made the stepper skip steps somewhat randomly

That’s exactly how I wpuld test heat creep. Maybe that’s not it

Since you’ve already excluded a damaged nozzle and other parts, I’m gonna suggest heatcreep.

Maybe the extruder fan broke, so heat creeping up the extruder and melting the filament before it should?

This is a picture etho himself published, it’s included his hermitcraft s10 e5 video, when he talks about his setup with the other hermits for the ranking mumbo organized. Here

I’m a bit rusty on selenium, but iirc there should be some command line argument to select the profile on launch. You could try that, i remember there’s a way to specify command line arguments from selenium