Truck gets power and attempts to turn over.

Which made me think it wasn’t the starter or battery.

Looking things up online it pointed me to the fuel pump.

I went through and did the whole diagnostics with checking that. Including checking the fuses and relay.

I found a video saying the fuel pump control module could be messed up, and it looked pretty rusted out so I changed that. But it didn’t fix the issue.

So I going back to the fuel pump diagnostics of the fuel pump, it said to turn the accessory on with the key and you should hear the fuel pump kick on if you put your ear to the gas cap. I did but I honestly don’t know what I’m supposed to be hearing.

I’ll probably go ahead and replace it, but is there anything else that I should be checking or what?

  • @[email protected]OP
    2•3 days ago

    I have a OBD2 scanner, but nothing new has popped up actually. I just got this truck a couple of months ago and I’ve been slowly clearing error codes. There’s still only one left and it’s an evap sensor that needs to be replaced, but it’s kinda hard to get to. So my plan was to do it when I replace crossmembers in the bed.

    Edit: But thanks for confirming. I just wanted to make sure I wasn’t missing anything that I should also be checking

    • @Varyk
      1•3 days ago

      got it.

      yea, the fuel pump would definitely be my first check in those circumstances.

      best of luck