edit: after 20 comments, i’m adding a post description here, since most of the commenters so far appear not to be reading the article:

This is about how surprisingly cheap it is (eg $15,000) to buy a complete production line to be able to manufacture batteries with a layer of nearly-undetectable explosives inside of them, which can be triggered by off-the-shelf devices with only their firmware modified.

screenshot of paragraph from the article saying "The process to build such batteries is well understood and documented. Here is an excerpt from one vendor’s site promising to sell the equipment to build batteries in limited quantities (tens-to-hundreds per batch) for as little as $15,000:" followed by a screenshot of "Flow-chart of Pouch Cell Lab-scale Fabrication" showing a 20 step process

  • Uranium 🟩
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    1
    ·
    3 months ago

    They don’t necessarily require a starter explosive, certain types do of course. It’s more about overcoming the initial energy required, for example the arc from an electric arc lighter could probably overcome that requirement in a lot of scenarios.

    • Echo Dot@feddit.uk
      link
      fedilink
      English
      arrow-up
      1
      ·
      3 months ago

      The type of explosive used in this is not a high explosive. If put in a fire it would have exploded