I’ve been using HA for a while; having my home just “do things” for me without asking is fantastic. My lights turn on to exactly the levels I want when I enter a room, my grass and my plants get watered automatically, heating and cooling happens only when it needs to. There are lots of benefits. Plus, it’s just a fun hobby.

One thing I didn’t expect, though, is all the interesting things you can learn when you have sensors monitoring different aspects of you home or the environment.

  • I can always tell when someone is playing games or streaming video (provided they’re transcoding the video) from one of my servers. There’s a very significant spike in temperature in my server room, not to mention the increased power draw.
  • I have mmWave sensors in an out-building that randomly trigger at night, even though there’s nobody there. Mice, maybe?
  • Outdoor temperatures always go up when it’s raining. It’s always felt this way, but now it’s confirmed.
  • My electrical system always drops in voltage around 8AM. Power usage in my house remains constant, so maybe more demand on the grid when people are getting ready for work?
  • I have a few different animals that like to visit my property. They set off my motion sensors, and my cameras catch them on video. Sometimes I give them names.
  • A single person is enough to raise the temperature in an enclosed room. Spikes in temperature and humidity correspond with motion sensors being triggered.
  • Watering a lawn takes a lot more water than you might expect. I didn’t realize just how much until I saw exactly how many gallons I was using. Fortunately, I irrigate with stored rain water, but it would make me think twice about wasting city water to maintain a lawn.
  • Traditional tank-style water heaters waste a lot of heat. My utility closet with my water heater is always several degrees hotter than the surrounding space.

What have you discovered as a result of your home automation? While the things I mentioned might not be particular useful, they’re definitely interesting, at least to me.

  • earphone843
    link
    fedilink
    English
    arrow-up
    13
    arrow-down
    2
    ·
    2 days ago

    Having an oversized furnace really isn’t a bad thing, and only having it run half the time sounds like a good thing to me.

    • femtech@midwest.social
      link
      fedilink
      English
      arrow-up
      27
      ·
      edit-2
      2 days ago

      It wears out the furnace doing short burts and the house doesn’t get heated evenly. I had the original furnace from 1968. When I upgraded everything with insolation and better windows, I went from a 80,000 BTU on/off furnace to a 40,000 but modular furnace. No more sweating after 10min and then cold. Just evenly bring up the temp over a longer time. https://youtu.be/DTsQjiPlksA

      • Justin@lemmy.jlh.name
        link
        fedilink
        English
        arrow-up
        9
        ·
        edit-2
        2 days ago

        That technology connections video is great. It’s crazy how oversized heating systems are, especially when it costs us so much money.

    • Thrashy@lemmy.world
      link
      fedilink
      English
      arrow-up
      22
      ·
      2 days ago

      A little headroom ain’t bad, but it had three times the required heating capacity for my area’s “design day” low, which meant that for most of the winter it was kicking on for maybe 5-10 minutes per hour and then leaving massive cold spots in the house, because the thermostat was smack in the middle and all the walls were bleeding heat.

      My new heat pump is just about 2x the design day heat requirement, but that also means it’s got capacity to handle extreme lows without resorting to resistance heat, and in any case it’s fully modulating so the house has stayed quite comfortable so far.

    • acockworkorange@mander.xyz
      link
      fedilink
      English
      arrow-up
      4
      ·
      2 days ago

      That was in a worst case scenario though. I’d expect my furnace to reach closer to 80% duty cycle in a once in a lifetime cold front.

      • Justin@lemmy.jlh.name
        link
        fedilink
        English
        arrow-up
        6
        ·
        2 days ago

        It’s better to have it max out in a 100 year cold snap, as they don’t happen too often, and it’s ok to drop a few degrees when that happens. Much more important to save money on your heat pump investment than spend thousands worrying about weather that never happens.

        Technology Connections video about this problem:

        https://youtu.be/DTsQjiPlksA

        • acockworkorange@mander.xyz
          link
          fedilink
          English
          arrow-up
          3
          ·
          2 days ago

          I thought working 100% for hours on end wasn’t recommended for a residential unit. Love me a Technology Connections episode, thanks!

          • Justin@lemmy.jlh.name
            link
            fedilink
            English
            arrow-up
            3
            ·
            2 days ago

            yeah, I could be wrong, but that was the takeaway I got from the video, yeah. I have district heating so I don’t have first hand experience.

      • MNByChoice@midwest.social
        link
        fedilink
        English
        arrow-up
        2
        ·
        2 days ago

        Even 100% on the coldest day is not per se an issue provided additional heat can be used. Space heaters, gas fire places, and baking being big ones.