I worked with a software for quantum physics and electronic transport from microscale to mesoscale. It had a “python based” DSL that had support for units through that module. Seems the perfect scenario for such entity, so we wrote it integrating another similar package (it’s not the units package, I can’t find it anymore. In any case, it let you say things like speed = 3 * meters / second)
The results were… interesting.
There are many major problems:
managing scales. What if you add 1 meter and 1 nanometer? it’s technically possible, but you have loss of precision? or should it convert everything to nanometers? or increase the precision and set it to meters? Now multiply this for all the various rules of conversion and potential scale difference of various units and you get in a mess very fast.
constants. Researchers (the target of that language) often use fixed constants. Of course these constants have units. Of course they are important for dimensional analysis, but if all your work is in one measure domain (e.g. you are always using atomic units) then you just don’t care about the unit of measure of that constant. It’s known, but who cares? However, to perform math with dimensional correctness, now you force the researcher to define the constant in the script as the number followed by the unit, which again adds nothing but a chore of finding somewhere and writing in your meta language the unit.
Sometimes you are handling logarithms of metricated units, e.g. what’s the unit of measure of log(3 meters)? or what is the unit of measure of a cholesky decomposition of a matrix of metricated stuff? I honestly still don’t know as of today, but… does it matter? Do you care? Especially if they are in-transit numbers?
Massive performance impact and trouble when specifying arrays or mixing them. When specifying geometry information of large molecules, what do you do?
specify an array, followed by the unit (meaning that the whole array numbers are all in the same unit?), or do you grant to specify one element in e.g. nanometers and the other in micrometers? now you have to eventually reconcile and normalise. What if you have to perform a multiplication between two matrices one in nanometers and one in micrometers? again, reconciliation. It’s a nightmare. Additionally, now these values are no longer memory contiguous, which trashes your cache and makes it close to impossible to transfer data to C, for example, for performance gain.
Units tend to be short names. This pollutes the namespace with short names such as m, s, etc. The result is that the likelihood of users overriding unit names is very high. So you write them in extended form, but then it becomes a chore because now instead of saying 3 * m / s they have to write 3 * meters / second. Or worse; 3 * units.meter / units.second.
Dimensional analysis implies that you might have to simplify all your units, to a normalised form, otherwise you end up with really complex behavior trying to perform operations. E.g. fuel efficiency is measured in meters squared, which is a very weird measure because it’s basically cubic meters (of fuel) divided by length traveled (in meters). The reynolds number is actually a pure (no unit) number. What should you do if you use the equation? simplify the pile of units until you eventually reduce it to a pure number, or leave it as it is?
So, it looks cool, but in practice it’s pointless. The only practice to follow is:
accept and output whatever unit makes sense for the business domain. Store them in a variable named explicitly with the unit (e.g. length_angstrom) until converted for internal use. Then you can implicitly assume the units to be standardized at one unit realm and omit the explicit unit.
convert at the interfaces fro user into metric or business specific units (eg. atomic units) and only use this form internally, in strict consistence.
In other words:
user gives stuff in micrometers -> store it in length_um -> convert it in nanometers -> store it in length -> use length from now on (implicitly in nanometers)
But all the downsides you mention are inherent to the problem, not to adding dimensions.
managing scales
How do you add a nanometer and a meter without units? You need to make the choice loss of precision vs convert to nanometer anyway. Types just give you reassurance that you did the right thing (at opposed to, say convert m to gigameter instead of nanometer, because you forgot a minus sign for the conversion).
Constants
A good unit system has the constants saved. I don’t need to look up the dimensions of hbar in eV, I just do units.hbar and get the thing I mean, not the number that implicitly has a J or eV next to it. And if you have a constant that is not in the units library, you only need to define it once. This really isn’t the problem you make it seem.
Logarithms
I am very curious where you take logarithms of measures with dimensions and why you cannot normalize to e.g. l/1m // length in meters before taking the log. A unit system doesn’t prevent you from doing this, it just makes it explicit what you implicitly did anyway (but didn’t tell anyone else, because it’s implicit)
Performance
This is a fair point and I will grant you that. If you do large scale simulations you need performance more than anything. But most math you do in science is a short script that I don’t want to pour an hour into to make sure I didn’t fuck up the units. I want to write the script, have the computer check the units and then take a break while the computer takes an hour to compute the result.
Units and namespaces
Not a big problem in my experience. The vast, vast majority of variables are derived. You don’t need to write v=3 * meters / second, you have distance=100 * meters and time=33 * seconds somewhere in your code anyway, so you only need v= distance/time. The assignment to v is identical, if you have units or not. You only need to define the input, and only do it once.
normalized form
The units library simply allows you to choose. print(fuel_efficiency.in(1 * liter / (100 * kilometer))) // 5 l/100km or print(fuel_efficiency.to_si_base_units()) // 5e-8 m**2
I have written code of the form xxxx_in_meV, yyyy_in_per_cm_cubed, etc before. It’s much worse than a proper unit system library.
Because if you don’t use a library you may be able to use a number for your constants - but you have to find out the value of your constants in some weird jumble of dimensions. It’s the difference between target_efficiency = 5 * liter / (100 * km) and target_in_metersquared = 5e-8 // 5 l/100km, converted to base units
Taking user input is much easier too. Just do units.parse(user_input), and the user is free to give um or nm or Å. No need for a prominent tip in the ui “input must be given in um!”.
All that being said, a new language is not what I am looking for. I use python sympy (though it’s not very ergonomic to use) for proper script programs and insect.sh if I need to convert something quickly.
EDIT: insect.sh tells its users to use numbat now, hahaha! numbat.dev has exactly the same UX though, so I’ll just recommend that now for those quick physics calculations. It really is an invaluable tool to have.
My point is that it’s mostly useless to use a language that supports these kind of things, because the proper programming practice is to normalise and treat the edge cases at the interface. Once you are inside your own codebase, you use SI at the scale that makes sense and that’s it. No more ambiguity, no more need to carry the unit around. The unit is implicit and standardised throughout your code, and you don’t have to carry around dead weight (in memory and computation) for nothing.
When something is enforced on type level it doesn’t require your memory and usually doesn’t require computation.
As of lately I came to think that being explicit is mostly better than being expressive. So in this case stating all the units might work better than having a concise progtam.
This would be so nice in a mainstream language, I wonder if it would be possible with rust’s macro system?
The uom crate implements this for Rust.
The core functionality is based on generics but there are some macros for defining custom measurement systems.
I disagree.
I worked with a software for quantum physics and electronic transport from microscale to mesoscale. It had a “python based” DSL that had support for units through that module. Seems the perfect scenario for such entity, so we wrote it integrating another similar package (it’s not the units package, I can’t find it anymore. In any case, it let you say things like speed = 3 * meters / second)
The results were… interesting.
There are many major problems:
So, it looks cool, but in practice it’s pointless. The only practice to follow is:
In other words:
user gives stuff in micrometers -> store it in length_um -> convert it in nanometers -> store it in length -> use length from now on (implicitly in nanometers)
The reverse for output
But all the downsides you mention are inherent to the problem, not to adding dimensions.
How do you add a nanometer and a meter without units? You need to make the choice loss of precision vs convert to nanometer anyway. Types just give you reassurance that you did the right thing (at opposed to, say convert m to gigameter instead of nanometer, because you forgot a minus sign for the conversion).
A good unit system has the constants saved. I don’t need to look up the dimensions of hbar in eV, I just do units.hbar and get the thing I mean, not the number that implicitly has a J or eV next to it. And if you have a constant that is not in the units library, you only need to define it once. This really isn’t the problem you make it seem.
I am very curious where you take logarithms of measures with dimensions and why you cannot normalize to e.g.
l/1m // length in metersbefore taking the log. A unit system doesn’t prevent you from doing this, it just makes it explicit what you implicitly did anyway (but didn’t tell anyone else, because it’s implicit)This is a fair point and I will grant you that. If you do large scale simulations you need performance more than anything. But most math you do in science is a short script that I don’t want to pour an hour into to make sure I didn’t fuck up the units. I want to write the script, have the computer check the units and then take a break while the computer takes an hour to compute the result.
Not a big problem in my experience. The vast, vast majority of variables are derived. You don’t need to write
v = 3 * meters / second, you havedistance = 100 * metersandtime = 33 * secondssomewhere in your code anyway, so you only needv = distance/time. The assignment tovis identical, if you have units or not. You only need to define the input, and only do it once.The units library simply allows you to choose.
print(fuel_efficiency.in(1 * liter / (100 * kilometer))) // 5 l/100kmorprint(fuel_efficiency.to_si_base_units()) // 5e-8 m**2I have written code of the form
xxxx_in_meV,yyyy_in_per_cm_cubed, etc before. It’s much worse than a proper unit system library.Because if you don’t use a library you may be able to use a number for your constants - but you have to find out the value of your constants in some weird jumble of dimensions. It’s the difference between
target_efficiency = 5 * liter / (100 * km)andtarget_in_metersquared = 5e-8 // 5 l/100km, converted to base unitsTaking user input is much easier too. Just do
units.parse(user_input), and the user is free to give um or nm or Å. No need for a prominent tip in the ui “input must be given in um!”.All that being said, a new language is not what I am looking for. I use python sympy (though it’s not very ergonomic to use) for proper script programs and insect.sh if I need to convert something quickly.
EDIT: insect.sh tells its users to use numbat now, hahaha! numbat.dev has exactly the same UX though, so I’ll just recommend that now for those quick physics calculations. It really is an invaluable tool to have.
My point is that it’s mostly useless to use a language that supports these kind of things, because the proper programming practice is to normalise and treat the edge cases at the interface. Once you are inside your own codebase, you use SI at the scale that makes sense and that’s it. No more ambiguity, no more need to carry the unit around. The unit is implicit and standardised throughout your code, and you don’t have to carry around dead weight (in memory and computation) for nothing.
When something is enforced on type level it doesn’t require your memory and usually doesn’t require computation.
As of lately I came to think that being explicit is mostly better than being expressive. So in this case stating all the units might work better than having a concise progtam.
I don’t know, but maybe check out numbat, it’s a new scientific calculator that is written in rust.