I’m looking to create an easy solution that is child/wife friendly. I’m hoping to get a set up going without internet. I however would like it to run like a Chromecast with plex.
I was thinking of a
Dell Optiplex 3020M Mini PC USFF, running windows 10
An external hard drive with content.
From here is where I have gaps. Could I set up a plex server offline on the device, with plex media player and use an Flirc remote with pre-programmed buttons?
Essentially, I’m trying to create the experience of watching Netflix on a Chromecast but with plex and a pc remote control of some sort (with pre-programmed buttons that load up content so kid and wife only have to press one or two buttons to get to their shows)
Thanks!
I second this. While I love my Plex, I found out one day when my internet was gone that it’s not so great when the internet is down. My plan is to keep a copy of Jellyfin on my Plex machine so if I am ever in that position again I just stop Plex and fire up Jellyfin.
I haven’t tested it, but the info text suggests that you can work around the auth issue by adding your subnet to “List of IP addresses and networks that are allowed without auth“ (found in Plex Settings > Network).
I haven’t run into a memorable problem before using Plex in spotty internet areas (while in an RV) or when moving (before internet). But I’ll probably test this setting out one of these days, just in case.
So that is when you have Managed Accounts. People in your house and subnet can access plex without having to log in. They just pop up and click on their account to watch. When the internet is out, what I noticed is that every device on the subnet was only able to select the Home Admin account, so individual selection of Managed Accounts was not available when you couldn’t reach the Plex mothership for authentication. Not completely unusable, but it wasn’t ideal. If OP wanted to use Managed Accounts, that’s not going to be possible with no internet. But with Jellyfin, it doesn’t need that to have managed accounts. I had Plex and Jellyfin running on a VM at one point, and was able to switch between the two so that I could keep both libraries up to date. I switched to a dedicated machine and haven’t put Jellyfin back on, but that is another solution for OP, just have both loaded on the machine, and use whichever one is best for them at the time.