Track_Shovel to [email protected]English • 5 months agoIAMA AMA Tech AMAslrpnk.netimagemessage-square90fedilinkarrow-up1981arrow-down121
arrow-up1960arrow-down1imageIAMA AMA Tech AMAslrpnk.netTrack_Shovel to [email protected]English • 5 months agomessage-square90fedilink
minus-squareAwkwardLookMonkeyPuppetlinkfedilinkEnglish12•5 months agoIf it’s plastic, then it’s fine.
minus-squareAwkwardLookMonkeyPuppetlinkfedilinkEnglish3•5 months agoPlastic isn’t a conductor, so the current wouldn’t travel between the posts across the handle.
minus-square@[email protected]linkfedilink0•5 months agoMetal is a conductor and would get very hot in a dead short melting plastic.
minus-square@[email protected]linkfedilink2•edit-25 months agoYes but it wouldn’t short because the current from one terminal would not travel across the plastic handle to the other
minus-square@[email protected]linkfedilink1•edit-25 months agoI was making a joke using the metal handle and melting plastic, instead of using the plastic as the handle.
If it’s plastic, then it’s fine.
A bit of copper would spice things up
It can melt plastic does that count?
Plastic isn’t a conductor, so the current wouldn’t travel between the posts across the handle.
Metal is a conductor and would get very hot in a dead short melting plastic.
Yes but it wouldn’t short because the current from one terminal would not travel across the plastic handle to the other
I was making a joke using the metal handle and melting plastic, instead of using the plastic as the handle.
better if it’s rubber