I’m in need of a cable crimper and some other network tools like a tone gen/probe, cable snipper/stripper, and I’ll probably also get a cable tester, for a couple of jobs I’ll be doing soon

So, I’m assembling a basic toolkit to install the physical network parts, and I’m asking here for recommendations on mid and high quality tools so I can decide on what to get

As one should do with tools, I’m ready to spend a buck (or euro, in this case) to get good and durable stuff, but these days looking for reviews online is a marketing shitshow, so I thought I’d come here to look for recommendations and try to find someone with actual practical knowledge and experience

Any advice is welcome!

  • ruplicantOPEnglish
    2·
    10 months ago

    that’s perfect, thank you so much! I’m currently reviewing each tool. I’d heard about Klein Tools and now that I look at them, they seem solid

    actually, I’ve only recently learned about pass-through heads as I’ve never used nor seen any. was hoping the VDV226-110 Crimper could do both but it’s not the case. I’ll probably go for a standard one for now but will keep an eye out for pass-through heads

    I found also the VDV226-107 as a standard head crimper but on the shape of the 110 instead of the classic 011. both also act as stripper and cutter

    • CannedTunaEnglish
      3·
      10 months ago

      Pass throughs cost a little more, but the time you save is 100% worth it. When you feed the wires into the head they come out the front so you can check the color code and the crimper trims them perfectly to length. So much easier than trying to trim the wires to the perfect length and peaking through the head to see if they lined up right.

    • lemming741@lemmy.worldEnglish
      2·
      10 months ago

      Passthrough is the only style I’ll use anymore. Once you use them, you’ll never go back.