I bought a piece of 1.5 inch stiff foam to try to fix a sag in a bed. It didn’t work but having that thick piece of solid foam around has been a life saver.
Need something flat to put a laptop on? Throw it on the foam. Going to be doing something that requires you to be on your knees for a while? Get the foam!
It went from stupid purchase to something I’d gladly replace if it broke.
Got a bidet as a joke gift for Christmas a few years ago, it has been an absolute game changer. Hate pooping anywhere but home now, I actually feel clean, and use much less toilet paper.
When I worked at a small startup, we were moving to a new office and I was asked to help with the buildout. I engaged with the flooring vendor, and he came by one day to drop off a carpet sample. He put it on my desk where my mouse was. It was a rectangle sample of tight knit office carpet, about 18”x22”. When I got back to my desk, I just put my mouse on top of it and started using it as a mouse pad. That was 15 years and 3 companies ago, and I still use it as my mousepad. It’s perfect for the mouse to glide on, soft enough for my wrist to rest on, absorbent of sweat or drink condensation, and large enough I never hit the edge. I will never not use it. It is my mouse carpet, and I love it.
So you’re saying you decline to take this business opportunity which could have made you rich for 15 years just to feel superior to us gaming-spaceage-mousepad plebs with your exclusive desk carpet? How dare you.
How does it feel being superior to all the lame mousepad users?
Good. Really good.
I work in automotive interiors tooling. We had a customer bring by a sample of this headliner material. But they brought an entire roll of it, four feet wide, no idea how long. Probably 75 feet. I cut a couple feet off of it, now my whole desk is a mousepad.
Better than car carpet mousepad - imagine vacuuming your desk for 15 minutes and still have sand particles jumping around under the vacuum head like fleas.
That is a nice solution. There are also these giant mouse pads that can cover most of the desk. They are awesome.
An oversized poncho cape from the local Goodwill. It was woven in different shades of blue and while I’d never wear it outside, I’ve used it as a wearable blanket at home for a few years now.
I found out it was actually hand made, and costs 300+ USD from the original shop. Bonus points, I feel like a wizard when I wear it
Here’s an odd one my wife and I were just talking about. Some years ago, we were redoing our kitchen and the contractor told us to go buy the kitchen faucet we wanted. We went off, looked at several, and picked the one we thought looked the best with what we were doing.
When the contractor went to install it, he opened the box and a battery pack fell out. I couldn’t for the life of me figure out why a faucet would need batteries. It turned out that you can turn it on and off by touching it anywhere (handle, faucet itself, whatever), you just leave the physical handle open and set where you want it, then you can touch on and off. I thought it was the dumbest thing ever and we’d never use it.
Flash Forward to now and it’s one of the most used conveniences we’ve ever bought. All those times your hands are covered in raw meat or other cooking mess? Just touch the faucet with your elbow. Rinsing a bunch of veggies one at a time? Tap on, tap off. It works flawlessly, unlike those touchless ones at the airport: no delay and works every time. We will never have a kitchen sink without it - my wife wants them for the bathroom.
I needed a “lap desk” or something to put my laptop on, but I wanted it to be low-profile and I could only find a wooden cutting board. Now wooden cutting boards are the only thing I use as lap desks because most actual lap desks I find are super bulky.
A 3D-Printer, I thought I just play around with it and get bored, but you discover so many things that you can do!
The handle on the fridge broke? Print new ones. Need a Flowerpot? Just print one. The router needs a wallmount? I have one ready in a few Hours.
Also I can watch it print for hours, very fascinating and calming.
ventilate my dude. read up on breathing around your 3D printer while its printing. no bueno
Micro plastics making me feel spastic!
E: if you know the song I will give you a Lemon
Aqua - Barbie Girl.
🚫
they were close!
Wait until you start printing more printers
Dammit! I feel so attacked. But I can quit any time I want.
I just don’t want to.
Bought 1, which printed number 2, which printed number 3. Really want to design a delta rn even though there is still so much to fix/upgrade on al 3
I got one to print parts for my drones thinking it would be no big deal and it turned in to a hobby in itself.
I’ve really been resisting getting into drones via my 3d printer. I just love the idea that I could print out parts and make my drone better and better!
I only use it for things like guards, wire/cap/cameral holders… gopro case… things like that. but the frames are all carbon fiber. There are templates to print the entire drone out off the printer but I have not done that.
You can get the electronics pretty cheap. It might be a fun project for you :)
I remember literally watching it for an hour when it was new, it was fascinating.
I found one in a bin, and after a dumpster dive and £10 worth of parts, it’s now the most used appliances in my house.
Yeah except you’re never really saving a lot of money and even when you do some duct tape would have worked just fine
That’s simply not true. Paying $250 for a printer of decent quality, and a few functional repairs will pay for itself…
well, the handle was fixed with duct tape until I got a printer …
nothing will ever truly replace duct tape!
Which model do you have?
An Ender 3 V2
Now I’m thinking of getting one. But hear me out, I have a lot of tools already. And it will suck me in to stuff that I didn’t know existed.
Get a Sovol SV06, it’s going to be cheap, easy to use, and minimal maintenance. You won’t regret it. Even if you just use it for jigs and custom clamp points, or something simple like replacing a missing end cap or something, every shop/garage/home can benefit from a 3D printer. It can be just another tool, or a hobby that consumes you, you can dive as deep as you want lol. Feel free to PM me if you have any questions!
So noob question - I got a 3D printer relatively recently and have printed a few things with it by downloading files from various websites.
How do you go about making or getting files for your specific custom jobs like these please?
Thanks, will take a look!
An ebike: I don’t even really drive anymore most of the time and it beats the hell out of being stuck in traffic. Getting around is fun again.
I always enjoyed cycling and still ride my MTB, but for getting around town quickly, ebikes are hard to beat.
Bug zapper flyswatter. Like you can buy at Harbor Freight for a few bucks. It might not be a terribly effective solution to the overall fly population, but in terms of grim-bloody-vengeance-per-dollar, it’s one of the best investments I’ve ever made.
My wife bought me a Beard Bib as a joke gift after I found it online one day. It’s basically a smaller version of the bibs you wear when getting your hair cut, but with suction cups attached to the bathroom mirror to hold it horizontal and catch stray hairs when using an electric shaver. It looks ridiculous.
I now use it every time I trim my beard, even if my wife still laughs at me every time she sees me in it. Cleaning up all the stray hairs was always a pain in the ass, but this thing does a surprisingly good job at catching 99% of the hair, and I can just brush it all into the trash when I’m done.
My wife got me a fitbit. I resisted a little bit because I didn’t want to have yet another device to monitor, charge, and maintain etc. I’ve been really surprised and impressed and how effective it has been in subtly encouraging me to make some small improvements in my habits. Not a bad deal for $100.
Mechanical keyboard. Almost had no money back then, but wanted to treat myself. It costed 100$, and I regretted it the next morning. Felt like shit, but it was so cool to type on.
After 5 years, this metal-frame keyboard managed to survive many outside gigs, long travels, literal war, and it’s still with me. And I still love typing on it. Sometimes I code just to type. You can guess why I don’t use code completion tools.
Bed sheet suspenders. Dumb problem, stupidly cheap, horribly made, and ABSOLUTELY fixed the friggin sheets being yanked off the corner of the bed twice a night by my tumble-dry-medium sleeper of a spouse.
When they finally broke after almost 2 years I sewed some that’ll last 10 years and I don’t regret them at all.
my tumble-dry-medium sleeper of a spouse.
ROFL! Hahaha… I am gonna call my gf that from now on…
Hello, I am the tumble dry spouse and the number of times I’ve been thwapped in the face with elastic in the middle of the night is too damn high. I’m going to get some of these. Do you have a tutorial or explanation of how you sewed some?
I never thought of this. Good idea. Purchased.
This one I can absolutely agree with. Takes an extra couple seconds when you’re changing sheets but you will never have to redo the corners ever again.
However, I haven’t been needing them since I started using Threshold sheets from Target. The corners are deep and have a ton of stretch. Of course I keep the suspenders around for when I need them because they’re so small that the footprint is negligible.
Scooter. Not an electric one. I had a thought once “hey I did ride one in childhood, maybe it can be a bit of nostalgic fun from time to time”. Got myself the cheapest Chinese thing I could find, “no point investing too much into a fad”.
Turned out a scooter is absolute peak urban mobility. Short distances become much shorter. Mid-long distances become short. Granted, for a longer trip somehow the time gains diminish, probably because it’s not as efficient as a bike. But a scooter isn’t a long-hauler. It’s there to zip through an empty mall. It’s there to be folded up in a second and brought into a bus or a shop without being a hassle. It’s like 3-4 kg, not too fast for sidewalks but fast enough for bike roads, extremely easy to stop, doubles as a cart when carrying bags of groceries home.
The chinese one broke after 1 season because I was riding it everywhere. Then I got myself one from a better company, I chose it for small weight and portability. It’s technically children’s thing but I’m well below weight tolerance and also smol so it’s easy to handle. It’s already like a 5th year and whenever it’s not raining or too cold I ride it for shopping, errands, leisure walks, to work… Almost daily.
The wheel turns out to be a pretty good invention for multiplying by pi. For example, bicycling is about pi times faster than walking, with the same amount of effort.
They’re absolute shit if you live in a hilly city. Felt like I was going backwards.
Oh I believe. I live in an area that’s very flat.
I love the concept, tried some and would be willing to pay good money for a kick scooter that folds small enough to fit inside or hang off a big backpack, made of some super light material like carbon fibre
I’ve lost hours searching for such a thing online and the closest one is the Valor scooter. but unfortunately it’s ugly and they only make it for kids and I’m a big guy :/
Unfortunately I think we’re not there yet. My one folds into a meter-long bundle of a metal plank with wheels and a metal pipe and while it;s still light and handy it won’t fit in any backpack.
I feel it’s a lack of appetite. very few adults actually want non-electric. I’ve seen a much wider range of electrics, including small form, experimental ones and more :/
Which scooter do you have now?
The lightest from Decathlon which is large enough to hold someone over 12 yrs of age. They may or may not still have them on offer as it was a few years ago.
deleted by creator
This is me right now, I spent ~$2k on a bike 11 months ago instead of getting a second car for our household and had no idea if it would work out. At 1500 miles, almost all commuting, definitely worth the money. I back of napkin calculated that it pays for itself somewhere between 2k-3k miles with saved gas, wear and tear, etc. Also my wife wanted to buy a Tesla as a second car, and me leaving her the car during the workday has essentially saved us ~$45k in that respect. In better shape, eating better, sleeping better, and bike commuting has a lot to do with it.
It was kind of a stupid purchase for me because when I got it I wasn’t really into doing exercise or outdoor stuff.
Sigh… the notion that bikes are just toys or exercise equipment is such a harmful misconception, it’s ridiculous. Rather than writing a huge wall of text trying to explain the vast depths of how important cycling is I’ll just cite this blog post this blog post that explains it better than I can.
Of course, that article was written from an individual perspective, so even it manages to understate how important cycling is. Americans’ dismissal of cycling in favor of driving, and the car-dependent [sub]urban design that results from that choice, is the underlying cause for the housing crisis and all the other crises that stem from that!
Here is an alternative Piped link(s): https://piped.video/watch?v=4ZxzBcxB7Zc
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
deleted by creator
…not to mention the sprawl that makes not having a car difficult to say the least.
That’s by far the biggest issue (which I say not to diminish the others, but just to emphasize how bad this one is). The sheer space that cars take up in terms of roads and parking lots makes it practically impossible to design a city capable of accommodating them without ruining it for walking/biking/transit by having to spread destinations too far apart. We literally bulldozed thriving downtowns to make room for them (compare: Houston 1938 vs. Houston 1978)!
On top of that, cars are responsible for facilitating the literal Ponzi scheme that is suburbia. In short: subdivisions full of single-family houses with a lot of street frontage per housing unit generate less tax value per unit area than the infrastructure connecting them costs to maintain, making them inherently unsustainable financially (let alone ecologically, etc.).
Because Americans urban planners in the '50s had a hard-on for cars instead of taking bikes seriously as transportation, almost all of North America and increasing parts of the rest of the world are now fundamentally built wrong in a way that destroys health, the economy, and the environment all at once, and it’ll cost trillions of dollars to fix it.
I say this without exaggeration or hyperbole: ditching bikes in favor of cars may vary well have been the biggest disaster in the history of the world.
Custom-made ear plugs. Even if you only wear ear plugs occasionally (I do when in a noisy hotel, or when a neighbor goes a bit too crazy), they are so worth having.
Basically you go to an audiologist and they put something kinda liquid in each of your ears to take a mold of your ear canals. A couple of weeks later, you have plastic earplugs that have the exact shape of your inner ears.
Upsides: • They work, always. I would typically use wax or silicon disposable ear plugs before that, and sometimes in the middle of the night they might move and let the sound in; those don’t. Also, foam disposable ear plugs don’t stay in my ear, don’t ask me why. • They never hurt. Since disposable ear plugs get shoved into your inner ear until they take the shape, they continuously push against the walls of your ear canals. I would often feel kinda bruised after using them for a long time. • They are crazy comfortable. Put your ear on a pillow, and you barely feel them at all. • But do they block too much sound? That’s up to you. Basically, you choose the level of noise you want to keep out, which I believe is achieved by using different kinds of plastic.
They’re not a trivial purchase (I think mine cost $150), but then you use them for decades, so it’s definitely worth it. It was a stupid purchase in my case, because I bought them on a whim out of anger against my neighbor’s party one night; but they’ve followed me everywhere since!
