I’d really like to get started with this stuff but finding the technical requirement exhausting.

Trying to install privoxyvpn- “simply add the proxy to your browser and ensure the configuration is correct” (no help as to what this means, or how to do it and following the basic instructions just renders my browser unable to connect - googling the error message gives me replies like “simply make sure you read the logs” (no description of how to get to the logs or how to read them)

hearing I need a proxy and a reverse proxy, install SWAG — “first, point the A name at your server and the CNAME at the A and then install the SSL certificate - but be sure to pick between directories and subdomains if you have fewer than 20 domains in your account.”

Like what the fuck does any of this mean?

Then I hear if I have a proxy it might interfere with the reverse proxy and both might interfere with the VPN and vice versa.

How does one even get started?

  • habitualTartare@lemmy.worldEnglish
    2·
    10 months ago

    What your trying to do is a big overkill if you want only one device to connect to a VPN.

    Your VPN installed on your raspberry pi should have a “local network sharing” option. Based on some blogs mullvad had some issues with hostname and network shares (as of 07/2022) and you should try to connect via IP address if you’re having trouble.

    Local network sharing only works on the same subnet (IP address of your computer, Pi, and TV should have the first 3 parts of the IP match, ex: 192.168.4.xxx not 192.168.x.xxx).

    If you’re trying to SSH to the Pi when not connected to the same network it’s going to be much more difficult.

    If all above fails, this GitHub issue suggests advanced split tunneling setup on the Pi so that it can listen for SSH locally.

    • funkless_eckOPEnglish
      1·
      10 months ago

      but I can’t just have one device connected to the VPN. I have to be able to tell it what to download (from a device) and then watch it (from a device)

      edit: also, from your link there

      “Did you adapt the rules to your setup (IP, port etc)? What if you add a counter to the rules? Can you see them trigger on incoming packets with nft list ruleset?”

      No, I have not adapted and counted the rules to trigger on incoming packets with an nft list ruleset because I have no idea what that means

      From the link inside that link

      "the following rules should be applied.

      table inet excludeTraffic { chain allowIncoming { type filter hook input priority -100; policy accept; tcp dport 2010 ct mark set 0x00000f41 meta mark set 0x6d6f6c65; } chain allowOutgoing { type route hook output priority -100; policy accept; tcp sport 2010 ct mark set 0x00000f41 meta mark set 0x6d6f6c65; } }"

      no idea what any of this means, nor what to do with it, what to change, or where to put it.

      I can’t be a complete idiot for thinking this seems overwhelmingly technical. Like surely you can’t believe you can show that to the average person on the street and they’d be like “ohhh just table inet exclude traffic! of course!”

      and “exclude traffic” sounds like the opposite of what I want - which is to include my ssh traffic.