I’ve spent some time searching this question, but I have yet to find a satisfying answer. The majority of answers that I have seen state something along the lines of the following:

  1. “It’s just good security practice.”
  2. “You need it if you are running a server.”
  3. “You need it if you don’t trust the other devices on the network.”
  4. “You need it if you are not behind a NAT.”
  5. “You need it if you don’t trust the software running on your computer.”

The only answer that makes any sense to me is #5. #1 leaves a lot to be desired, as it advocates for doing something without thinking about why you’re doing it – it is essentially a non-answer. #2 is strange – why does it matter? If one is hosting a webserver on port 80, for example, they are going to poke a hole in their router’s NAT at port 80 to open that server’s port to the public. What difference does it make to then have another firewall that needs to be port forwarded? #3 is a strange one – what sort of malicious behaviour could even be done to a device with no firewall? If you have no applications listening on any port, then there’s nothing to access. #4 feels like an extension of #3 – only, in this case, it is most likely a larger group that the device is exposed to. #5 is the only one that makes some sense; if you install a program that you do not trust (you don’t know how it works), you don’t want it to be able to readily communicate with the outside world unless you explicitly grant it permission to do so. Such an unknown program could be the door to get into your device, or a spy on your device’s actions.

If anything, a firewall only seems to provide extra precautions against mistakes made by the user, rather than actively preventing bad actors from getting in. People seem to treat it as if it’s acting like the front door to a house, but this analogy doesn’t make much sense to me – without a house (a service listening on a port), what good is a door?

  • lemmyreader@lemmy.ml
    10·
    11 months ago

    Firewall for incoming traffic :

    • If you a home user with your computer or laptop inside a LAN you would not really need a firewall, unless you start to use applications which expose its ports to 0.0.0.0 rather than 127.0.0.1 (I believe Redis server software did this a few years ago) and do not trust other users or devices (smart home devices, phones, tablets, modems, switches and so on) inside your LAN.

    • If you are running a server with just a few services, for example ssh, smtp, https, some hosting company people I knew argue that no firewall is needed. I am not sure, my knowledge is lacking.

    Application firewalls, watching also outgoing traffic :

    If you compare Linux with some other Operating System you will see that on Linux for years an application firewall was non existing. But there is a choice now : opensnitch This can be useful if you run desktop applications that you do not fully trust, or want more control.

    • KalciferOP
      2·
      11 months ago

      If you a home user with your computer or laptop inside a LAN you would not really need a firewall, unless you start to use applications which expose its ports to 0.0.0.0 rather than 127.0.0.1

      Interestingly, on one of my devices, running # ss -utpnl shows quite a number of Spotify, and Steam sockets listening on 0.0.0.0. I looked up some of the ports, and, for example, one of the steam ones was a socket for Remote Play.

      But there is a choice now : opensnitch

      This is really cool! Thank you so much for this recommendation! This pretty much solves what was bugging me about outgoing connections in a layer 3/4 firewall like nftables.