Framework as in the laptop company, just for clarity. https://frame.work/. For those unaware, the idea is that these are laptops built with a high degree of modularity so that you can replace far more than a single stick of SODIMM with the goal of even upgrading your CPU and mainboard a few years down the line.
Also, Framework is partially owned by Linus Sebastien (Linus Tech Tips) so their marketing is “off the chain” as it were.
Over the past few years I have tried to convince myself to get one a few times. But… the pricing never made sense. As a quick exercise:
- A DIY (so no Windows key) 13th gen intel starts at 850 USD https://frame.work/products/laptop-diy-13-gen-intel?q=processor
- The associated mainboard+cpu is 450 USD https://frame.work/products/mainboard-13th-gen-intel-core?v=FRANGJCP04
- A Dell Inspiron 16 inch (since the samsung with the same specs was on a ridiculous sale and I am trying to prove a point) is 900 USD (on sale for 600) with a windows key https://www.bestbuy.com/site/dell-inspiron-16-0-2-in-1-touch-laptop-13th-gen-intel-evo-i5-8gb-memory-512gb-ssd-platinum-silver/6539908.p?skuId=6539908
850+450=1300. So you really aren’t even saving that much unless you actively refuse to shop a sale at Best Buy or pretend you are still a student when they ask. And that assumes you ONLY want to upgrade your mobo+cpu and nothing else.
But I still like the fundamental concept (of the marketing…) of upgradable laptops.
But then I finally watched the Tested teardown video with Norm (the heart and soul of Tested and has been since the Whiskey days) https://www.youtube.com/watch?v=drxOpMsr6sM and… the general takeaways were that there is a LOT of cool tech involved in the modularity but that the vast majority of people would never mess around with it after assembling their laptop for the first time. Also, Adam Savage has stickers.
Combine that with all of their modular ports being 20 dollar USB-C dongles with single ports and… this feels a lot more like the kind of bullshit Apple does than anything else. Why use the USB C dongle/hub that works with all your other devices when you can buy a 20 dollar HDMI port instead?
Same with stuff like the (honestly insanely cool) modular keyboard layout. Basically, the keyboard, touchpad, etc are all panels that can be popped off and swapped around. So if you want stupid LEDs, you can have them. If you want an offset keyboard, you can do it. If you want a 10key numpad, you can do that too. It is a genuinely awesome idea but… it is a lot of engineering for something that people will use maybe twice in their ownership of the laptop (once to configure, one to replace when they spill their drink). Same with things like being able to swap out the back module to have a GPU when you want it. You do that once.
Which… makes it feel like people are paying a premium for easier assembly at a factory.
And as for the upgradable hardware? Storage and ram are on point and they should be praised. But you are basically buying whole new modules for the CPU/mobo and the GPU and so forth. Which… is kind of necessary because it is so rare to find an actual mobile sized GPU in a consumer available format. But it continues to just feel like you are buying proprietary parts from a company (Framework want other companies to make parts but I have not looked through the terms and licensing).
But also? A friend pointed out: How many sticks of DDR3 ram do you still have? Because I know that I have a big bin of computer parts “just in case” that I will never use but also can’t be bothered to throw away because maybe I will. And that is what these modular parts become. You COULD recycle your old mainboad+cpu… or you can keep it in case you want to do a project that you never will and that would be perfectly fine with a raspberry pi or a cheap nuc anyway.
Contrast that with wiping your laptop and giving it to a nephew or dropping it off in an e-waste bin (and many stores offer incentives to do that).
All of which combines to… this feels a lot like the kind of “poison pill” compliance that Apple is doing on the right to repair side. They make a big deal about how they allow people to repair their shit now (that various governments threatened action…). But they tightly control the parts and rent out the hardware AND price it to strongly discourage hobbyists to the point that it mostly feels like they are just squeezing out the third party shops even more.
I’m torn because I do think the stated ethos is awesome. I… also have had no issues replacing my storage or upgrading my ram in my last few laptops but I tend to not get “flagship” models so there is that. But it is increasingly feeling like Framework is just building up IP to sell to manufacturers while having a net negative on the amount of e-waste in the laptop space.
I guess I was warmer on the “ports” when I thought it was some proprietary or straight up PCI-E connector. Instead of just a USB-C port.
Which I guess gets down to how solid those “rails” are for the 20 dollar dongles. Because if you break the inner C port, you are in the exact same mess.
Which… gets back to it being hard to really figure out how much of this is “teething issues” versus “this is secretly kind of shitty?”. Because replaceable ports is GOOD. I would even be cool with the underlying USB-C as the interface port. But “I need to have an hdmi port on my laptop and will spend 20 dollars on a proprietary dongle” is stupid. As opposed to "I need to have an hdmi port on my latpop. This also works on my tablet and my steam deck and any other laptop because it is a 20 dollar dongle that has an HDMI port, 2 USB A ports, and does power pass through. Which, again, feels like Apple shittiness while also increasing e-waste.
Which I think gets to where I am on a lot of the framework stuff. It sounds awesome but the implementation is REALLY straddling that line of “is this a teething issue or is this actually worse than what we currently have?”
The dongles are not proprietary. I’ve literally used my USB A module as a USB C to USB A adapter on a different laptop. The dimensions of the module are publicly available, nothing is stopping anyone from making their own. Before Framework offered their own Ethernet port module someone in the community actually manufactured their own using the 3D printing files that Framework provided.
“Proprietary” might be a bit too strong of a word. But considering the tight tolerances of the framework dongles (to minimize damage), I would actually be more worried about plugging that into a different device and damaging the ports that way.
And I guess I still just think of that as a “trap”. Because the answer should not be “buy all your special dongles to customize your laptop” and more “usb c is fucking magic. Just get one dongle that gives all legacy ports you need”. Like, I am still INCREDIBLY wary of the data transfer so I have an old anker (irony) 20 buck dongle that I use on travel. But my old company made it a point to have a dedicated usb c dongle in every conference room and it was actually REALLY nice because you basically just plugged in your laptop and had a nice double display setup, keyboard, and mouse for every single meeting.
The point of the ports is so you don’t need to have an external dongle. They arnt really there to hot swap but provide the right port always there so they shrewdly shouldn’t wear out and usb is more than fast enough for almost any port type now. I would much rather have a laptop with an Ethernet port and a full size HDMI than one with a single USB c that forces me to also pack a chonky dongle. Would rather just pack the cables .
If you’re already packing the cables…
And yeah. Fuck single usb c laptops. It is awesome that the 16 has 6 (?) usb c ports. I would probably say my sweet spot is closer to 4 but I am not going to complain.
My point is more: Its a “feature” that is encouraging people to spend money to reduce the capabilities of their laptops, in a weird way. It creates more e-waste by having dongles that you generally wouldn’t want to use with any other device (RIP my old thinkpad usb port that got fucked up by needing a wifi dongle in it 24/7…) and ignores the actual solution that has existed for years and works REALLY well.
Yes. But they also try to make sure that never happens. Cards are slotted and locked in solid (see new 16“ teardown by ifixit, the cards fly out after unlocking, needs some force). If you break it, they give repair shops full board view (under nda, because of intel) so can fix the port for cheap.
That is just a framework expansion card. Except 2 usb a port because physically does not fit.
You can also not use their cards, get it with 4 usb c and buy dongles for everything. This is choice you might not have on other laptops.
Seconding, the mounting rails are very strong. I have had the laptop fall from the desk with the ethernet card installed and a cable plugged in it. The ethernet cable, card and the card mounting mechanism took all the force from the fall. Nothing cracked, nothing detached, didn’t even get a network disconnect. They’re that strong.
I mean, with modularity you can pick your needs and make that choice yourself. Some people are willing to carry an extra dongle, and some prefer having the ports sit flush and nothing extra that they don’t need, up to you.
I built my own module that fits in they’re short perfectly, because they published all the specs.
Cost just a few bucks and it made my laptop do exactly what I wanted without anything extra sticking out the sides.