Prompt
Midjourney: a cozy little cabin with a colorful roof at the top of a cloudy peak, a long twisting slide leads down the side of the peak, a small garden is planted around the house --ar 4:3
Theme
This weeks theme is your dream home. Where would you want to live if your imagination is the only limit? A cozy cabin in the middle of nowhere? The gigantic pillow fortress you dreamed of when you were little? Or maybe a majestic tower on an asteroid drifting through space?
Go with whatever you, or your inner child, would love to live in :)
Rules:
- Follow the community’s rules above all else
- One comment and image per user
- Embed image directly in the post (no external link)
- Workflow/Prompt sharing encouraged (we’re all here for fun and learning)
- Posts that are tied will both get the points
- The challenge runs for 7 days from now on
- Down votes will not be counted
Scores
At the end of the challenge each post will be scored:
| Prize | Points |
|---|---|
| Most upvoted | +3 points |
| Second most upvoted | +2 point |
| Third most upvoted | +1 point |
| OP’s favorite | +1 point |
| Most original | +1 point |
| Last two entries (to compensate for less time to vote) | +1 point |
| Prompt and workflow included | +1 point |
The winner gets to pick next theme! Have fun everyone!
This challenge is over, @[email protected] wins and gets to host the next challenge!
Thanks everyone for playing, I loved seeing all of your houses.
Hope to see you in the next challenge! :)
I had to rely on Regional Prompter to get the composition even remotely right. SD really didn’t feel like putting any kind of large planet in the sky without it. I also learned today that SDXL models don’t know what Saturn is 🫠
Gen info
futuristic, scifi, intricate, elegant, highly detailed, majestic, vast expanse of the Titan’s surface, evoking a sense of wonder and awe at the beauty of space <lora:add-detail-xl:0.3> ADDCOMM
exterior of a dream home is perched on a cliff overlooking the vast expanse of the Titan’s surface, ADDCOL
neon planet in the sky ADDROW
winged spaceship on landing pad
Steps: 21, Sampler: DPM++ 2M Karras, CFG scale: 7, Seed: 4019266864, Size: 1216x832, Model hash: d8fd60692a, Model: leosamsHelloworldXL_helloworldXL50GPT4V, VAE hash: 235745af8d, VAE: sdxl_vae.safetensors, Variation seed: 3182209455, Variation seed strength: 0.05, Denoising strength: 0.4, Clip skip: 2, RP Active: True, RP Divide mode: Matrix, RP Matrix submode: Rows, RP Mask submode: Mask, RP Prompt submode: Prompt, RP Calc Mode: Attention, RP Ratios: “1,1;1,2,1”, RP Base Ratios: 0.2, RP Use Base: False, RP Use Common: True, RP Use Ncommon: False, RP Options: [“[”, “F”, “a”, “l”, “s”, “e”, “]”], RP LoRA Neg Te Ratios: 0, RP LoRA Neg U Ratios: 0, RP threshold: 0.4, RP LoRA Stop Step: 0, RP LoRA Hires Stop Step: 0, RP Flip: True, Hires upscale: 1.5, Hires steps: 10, Hires upscaler: 4x-UltraSharp, Lora hashes: “add-detail-xl: 9c783c8ce46c, add-detail-xl: 9c783c8ce46c, add-detail-xl: 9c783c8ce46c”, Downcast alphas_cumprod: True, Version: v1.8.0, Hashes: {“vae”: “235745af8d”, “lora:add-detail-xl”: “0d9bd1b873”, “model”: “d8fd60692a”}Wow, you dream BIG!
I like this one a lot
If there were an open sign up for colonists for Mars, Titan, etc. I’d put my name on there without hesitation.
Total upvotes: 10
Prize Points Most upvoted +3Workflow included +1OP Favorite +1Total 5
Congratulations! You won! I love the concept and the view is absolutely amazing.
It’s your turn to think of the next challenge.
Alright! That’s a neat little trophy. I’m working on a concept for the next challenge right now.
Great topic, thank you! Felt healthy brainstorming some of what I want in a house :)
prompt
dream interpretation house with glowing aquamarine solarpanel roofing, oddly shaped curving windows, with a garden with ginseng, ashwagandha, schisandra, ginger, garlic, lavender, mint, and a pond and stream with bacopa and other water plants, and a forest glade where all creatures are peaceful and welcome in the secret place of the magic forest thousands of miles from the nearest human. inside has beautifully arranged genetic engineering gear, computers, and various electronic and electrochemical devices each custom crafted with full knowledge of the underlying systems (((absolutely beautiful))), masterpiece, best quality, forestpunk style, (pastel colors), calm, tranquil, peaceful, sparkling, harmonious gardens, harmoniously placed stones, acoustics and solstices taken in to account, oil painting, illustration in the styles of the artists Rachel Ruysch, Alena Aenami, Emmanuel Shiu, Laurie Lipton, Sylvain Sarrailh, Saskia Gutekunst, Humberto Ramos, and Andreas Achenbach
That’s a gorgeous house, I love the gardens and the pond. It has a very magical quality to it.
thank you :)
i’ll get there some day
Total upvotes: 9
Prize Points Second most upvoted +2Workflow included +1Total 3
You got to a well deserved second place!
Again, I love your home. Dusk is such a wonderful time of day, I can practically smell the flowers :)
Where is the photographer?
inside, with me. we’re drinking coffee while talking about poppies and michael pollan
Total upvotes: 8
Prize Points Third most upvoted +1Total 1You’ve got a very unique house, I love the reflections and the support tree. It almost looks like it landed there :)
1 Tower Bridge House
Prompt:
A house built at the top of the Tower Bridge in London, photorealistic styleTotal upvotes: 7
Prize Points Workflow included +1Most original +1Total 2
You got a shared 3rd place with trollivier!
It’s a great concept! Seeing the ships sail underneath your house would be nice to see. I hope it comes with an elevator though :)
It does. The elevator takes you to the glass floor so you can see the cars underneath. My house is right above.
I’ve made so many nice houses over the past few days, but this is one of my most favorite.
Prompt: architecture photography of A collection of concrete egg-shaped houses, built inside a gorge, connected by walkways, a raging waterfall can be seen in the distance, trees with soft pink petals grow from the crags in the cliff, natural lighting shines through the mist of the waterfall, shot with nikon dslr --ar 3:2 --style rawLooks really cool! I’m getting some vibes of The Aerie in NieR Replicant.
Did you just use the same prompt as OP?
It’s a bold strategy Cotton, let’s see if it pays off
You know what they say, imitation is the sincerest form of flattery :)
they’re playing the inception game on you. You thought it was your dream, but the idea was implanted last week when you fell asleep on the train
Oh they shouldn’t have gone through all that trouble, I’m very very impressionable :)
And so it begins…
I picked this one because of the slide coming from the mountain top in the background
are you moving into thelsim’s dream?
It’s big enough to share!
is there a hidden elevator somewhere?
sliding down is easy but i wouldn’t like to take those stairs back up everytime
Even better, there’s a cable cart at the back of the house. I’d have shown it, but then you wouldn’t be able to see the awesome slide.
😁
Total upvotes: 6
Prize Points Total 0This looks vaguely familiar :)
I don’t really mind though, it was a one-off prompt and it’s nice to see someone else run with it.
Prompt is: A tall house on an impossibly tall mountain with a sign out front that says “go away”
In the bingilator 8 tries.
How do you say “go away” in Greek?
🤷
then there is the complication that comes with the greek alphabet. no way ai can do that in 2024
Total points 6
Prize Points Workflow included +1Total 1That’s the most relatable house in the challenge, I’d give it an extra point if we had a prize for it :)
4 out of 5 stars. I found this house on Airbnb. Beautiful quaint hilltop home with magnificent views! Perfect for a getaway. Had to remove one star for the sui-sliiiiiiiiiiiiiiiiiiiiiiiiiide…
Can’t wait to see these!
suislide 🤣
My Little hobbit home.
Made with comfyui. The workflow is embedded in this picture (Catbox)
Details
Base Model (first image) : fenrisxl_V16fp16 (CivitAI)
Outpainting Model: juggerxllnpaint_juggerinpaintV8 CivitAI)
Like in the hobbit, it all starts with a door:
Prompt:
frontal closeup Photo of A beautiful round wooden entrance door to a cozy hobbit burrow. A rune is carved at the bottom of the door. The door is painted blue.
Sampler: dpmpp_3m_sde
Scheduler: karras
Steps: 60
CFG: 7
But what is a door without a home? So we build the home around the door via outpainting.
Prompt:
frontal closeup Photo of A cozy hobbit burrow.
A cozy nice home needs some flowers. So lets give the home a nice flower garden:
Prompt:
beautiful flower Garden
But where should ou r hobbit home be located. I think a forest would be nice.
Prompt:
Beautiful forest
To reduce the strain on my graphics card, i am scaling the image back down to 1024x1024 for the next steps.
A home needs a nice fence. so lets add a nice picket fence.
Prompt:
Intricate detailed beautiful picket fence.
The finishing touch should be a nice Sky with clouds. This brings us back to the final image:
Okay soooooo, that took a lot longer than I anticipated, but I think I got it. It seems it is a problem with the VAE encoding process and it can be handled with the ImageCompositeMasked node that combines the padded image with the new outpainted area so that pre-outpainted area isn’t affected by the VAE. I learned this here https://youtu.be/ufzN6dSEfrw?si=4w4vjQTfbSozFC6F&t=498. The whole video is quite useful, but the part I linked to is where he talks about that problem.
The next problem I ran into is that at around the fourth from the last outpainting, ComfyUI would stop, it just wouldn’t go any further. The system I’m using has 24GB of VRAM and 42 GB of RAM so I didn’t think that was the problem, but just in case I tried it on a beastly RunPod machine that had 48GB VRAM and 58GB of RAM. It had the exact same problem.
To work around this I first bypassed everything except the original gen and the first outpaint. Then I enabled each outpaint one by one until I got to the fourth from the last. At that point I saved the output image and bypassed everything except the original gen and first outpaint and enabled the last four outpaints, loading the last image manually.
I used DreamShaper XL Lightning because there was no way I was going to wait for 60 steps each time with FenrisXL 😂 I tried two different ways of using the same model for inpainting. The first was using the Fooocus Inpaint node and Differential Diffusion node. This worked well, but when comfy stopped working I thought maybe that was the problem so I switched all of those out for some model merging. Basically, it subtracts the base SDXL model from the SDXL inpainting model and adds the Dreamshaper XL Lighting model to that. This creates a “Dreamshaper XL Lightning inpainting model”. The SDXL inpainting model can be found here.
You should be able to use this workflow with FenrisXL the whole time if you want. You’ll just need to change the steps, CFG, and maybe sampler at each ksampler.
Image with ImageMaskedComposite: https://files.catbox.moe/my4u7r.png
Image without ImageMaskedComposite: https://files.catbox.moe/h8yiut.png
Wow! Thank you for the effort and time you put into this! I will definitely look into the workflow. Model Merging sounds very interesting. I will look into it!
Very cool idea to use outpainting like that! I’m wondering if something happened to the image along the way. A lot of the details look burnt out by the final outpainting. Looking at the workflow, I counted 12 VAE decode/encode pairs. I know that changing between latent and pixel space is not a lossless process, so that might be it, but I’m not sure. I’m going to see if I can get a workflow going that maintains the original quality.
Comparison
Total upvotes: 6
Prize Points Workflow included +1Total 1That is a very cozy little home indeed!
And thanks for including the detailed workflow, so nice to see others helping out as well :)
Not fully what I wanted, but the result is quite OK, for some reason SD struggle to get that if I’m on the moon surface it doesn’t need to draw a moon on the sky
Workflow
you can inpaint earth in moon’s stead?
Of course inpainting didn’t manage the reflexion (well I could do a second inpainting) but even a quick test gives a nice results. I keep it it mind for next challenge
Great idea, I’ll try this week end
Total upvotes: 5
Prize Points Workflow included +1Total 1That’s a nice castle! It looks very ominous.
Wow, that’s a lot of cars. Is it a multi-generational home?
The wood construction is very nice, and the view looks great.I suppose it’s a home built above a car rental business.
would you really want to live in there?
Hmm, this makes me rethink the rental business part. Must be just a huge personal collection
Total upvotes: 6
Prize Points Total 0It’s a lovely house on top, not so sure about all those cars though :)
Interior: Living Room
Total upvotes: 4
Prize Points Total 0Very nice living room! The lighting and spaciousness makes it very attractive. Would love to have seen more of it.
Prompt : dream Norwegian home on an island in the middle of a fjord with rowboat and a dock, and aurora borealis in the sky
There’s a tree branch sticking out of my chimney ¯\_(ツ)_/¯
Total upvotes: 3
Prize Points Workflow included +1Last two submissions +1Total 2Congratulations, you made third place together with Cloudless!
It’s a really cozy little cabin, and the view is breathtaking.Thanks!
Total upvotes: 3
Prize Points Last two submissions +1Total 1Great design. The brutalist concrete house contrasts very nicely with the lush forest.
![[Community Challenge 30] Your Dream Home](https://sh.itjust.works/pictrs/image/cfeb0340-9107-4536-812a-855996aefa7e.jpeg){kind=link}
