Bulletproof? Is it waterproof? Ts&Cs say: ‘Failure to put Cybertruck in Car Wash Mode may result in damage’

  • inclementimmigrant@lemmy.world
    link
    fedilink
    English
    arrow-up
    71
    ·
    7 months ago

    Not even a water issue.

    The advisor said that “it is a known issue in the Cybertruck that when you do a screen reset, instead of resetting in the standard two minutes, it takes five hours.”

    This is crappy and lax software testing and verification testing.

    • RecluseRamble@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      29
      ·
      7 months ago

      What even is a screen reset supposed to be here and why would you have to do it? Asking as a pleb conventional car driver whose screen just turns on and off with the car automatically.

      • inclementimmigrant@lemmy.world
        link
        fedilink
        English
        arrow-up
        14
        arrow-down
        1
        ·
        7 months ago

        It’s just like in my model 3 or my wife’s Teluride, the info screen/software can lock up or get stuck in a weird state and both have a way to reset it.

        Normally neither would be a big deal, I push a button(s) and the screen goes black, it comes back up, again no big deal but at least with the Teluride, there’s a the instrument cluster and heads up display to show your speed. I’m assuming the cyber truck is like my model 3 where the speed is only shown on the center screen. If it take’s five hours over the minute of downtime, well that’s going to be a problem. That said, in my model 3, I’ve only had to do this a handful of times on my model 3, mostly because the radio isn’t working and only once on the newer Teluride because the map was stupid.

        • Echo Dot@feddit.uk
          link
          fedilink
          English
          arrow-up
          23
          arrow-down
          1
          ·
          7 months ago

          Jesus I thought the software on my ford was bad. And it is bad but it doesn’t randomly stop working for no reason and have a reset button to fix it. It just doesn’t break.

        • RecluseRamble@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          16
          ·
          edit-2
          7 months ago

          Oh, so an actual reset button like on a PC! Its existence alone is admitting that the firmware is shit. An embedded system should never freeze.

          But admittedly, most car infotainment systems freeze/crash occasionally nowadays. Mine as well but it went with the Microsoft BSOD “solution” and restarts automatically.

          • nxdefiant@startrek.website
            link
            fedilink
            English
            arrow-up
            3
            ·
            7 months ago

            Yeah, most infotainment systems hide their memory leaks behind the fact that when you turn the car off, you reset the computer. Not so in an always on EV.

          • inclementimmigrant@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            arrow-down
            1
            ·
            7 months ago

            So I’ll push back and state that infotainment systems aren’t embedded systems, more akin to a phone OS with the wide array of UX applications.

            But yeah these infotainment systems are often left running on newer cars for connectivity and other features and just like any other OS, leaving it up and running is going to slow and get unstable over time for to memory usage.

            Like I said, mostly not a big deal unless you’re a Tesla and critical information is there and you didn’t regression test properly.