floofloof@lemmy.ca to Technology@lemmy.worldEnglish · 6 months agoRussia Says It's Assembled a Lithography Machine, Will Make 350nm Chips Soonwww.extremetech.comexternal-linkmessage-square59fedilinkarrow-up1279arrow-down117cross-posted to: [email protected]
arrow-up1262arrow-down1external-linkRussia Says It's Assembled a Lithography Machine, Will Make 350nm Chips Soonwww.extremetech.comfloofloof@lemmy.ca to Technology@lemmy.worldEnglish · 6 months agomessage-square59fedilinkcross-posted to: [email protected]
minus-squareEvil_Shrubbery@lemm.eelinkfedilinkEnglisharrow-up9·edit-26 months agoYeah, not to mention some low level engineers that built it only using a hairpin, a hammer, and a lithography machine … (ofc joking, but I bet there are like five nerds that basically made it all happen).
minus-squareBigDanishGuylinkfedilinkEnglisharrow-up1·6 months agoHairpin and a hammer? HA! THEY were lucky! We had to do lithography with nothing but a water droplet and sunlight! And firmware was burned in as well.
Yeah, not to mention some low level engineers that built it only using a hairpin, a hammer, and a lithography machine … (ofc joking, but I bet there are like five nerds that basically made it all happen).
Hairpin and a hammer? HA! THEY were lucky! We had to do lithography with nothing but a water droplet and sunlight! And firmware was burned in as well.