Camzing@lemmy.world to Ask Lemmy@lemmy.worldEnglish · 5 months agoIs it feasible to turn manufacturing most simple products into open source? Is this the future?message-squaremessage-square41fedilinkarrow-up182arrow-down14
arrow-up178arrow-down1message-squareIs it feasible to turn manufacturing most simple products into open source? Is this the future?Camzing@lemmy.world to Ask Lemmy@lemmy.worldEnglish · 5 months agomessage-square41fedilink
minus-squarespittingimage@lemmy.worldlinkfedilinkarrow-up5·5 months agoDo you mean the RepRap? Seems like there’s not much going on at the wiki.
minus-squareRobotToaster@mander.xyzlinkfedilinkarrow-up3·5 months agoIt was the original home 3d printer, but it kinda got overtaken by cheap mass produced printers. Prusa was originally a member.
minus-squareRichard@lemmy.worldlinkfedilinkEnglisharrow-up4·5 months agoBut tbf, Prusa carries on the spirit
minus-squareRobotToaster@mander.xyzlinkfedilinkarrow-up1·5 months agoDidn’t he close source a bunch of the parts to his newest printer?
minus-squareHootinNHollerin@lemmy.worldlinkfedilinkarrow-up1·edit-25 months agoI donno but If he did it’s because bambu etc are ripping him off
Do you mean the RepRap? Seems like there’s not much going on at the wiki.
It was the original home 3d printer, but it kinda got overtaken by cheap mass produced printers. Prusa was originally a member.
But tbf, Prusa carries on the spirit
Didn’t he close source a bunch of the parts to his newest printer?
I donno but If he did it’s because bambu etc are ripping him off