If you haven’t read about it before, the term comes from the band Van Halen, who demanded that there were no brown M&M’s backstage. People thought it was just a crazy rock star thing, but David Lee Roth later explained that it had a purpose:

Van Halen was the first band to take huge productions into tertiary, third-level markets. We’d pull up with nine 18-wheeler trucks, full of gear, where the standard was three trucks, max. And there were many, many technical errors—whether it was the girders couldn’t support the weight, or the flooring would sink in, or the doors weren’t big enough to move the gear through.

… So just as a little test, in the technical aspect of the rider, it would say, “Article 148: There will be 15 amperage voltage sockets at 20-foot spaces, evenly, providing 19 amperes … ” This kind of thing. And article number 126, in the middle of nowhere, was, “There will be no brown M&M’s in the backstage area, upon pain of forfeiture of the show, with full compensation.”

So, when I would walk backstage, if I saw a brown M&M in that bowl … well, line-check the entire production. Guaranteed you’re going to arrive at a technical error. They didn’t read the contract. Guaranteed you’d run into a problem. Sometimes it would threaten to just destroy the whole show. Something like, literally, life-threatening.

My Brown M&M atm is AI-generated comments like this (first comment is referencing something like df = ... that they removed from the code, but left the comment, second comment is super useless):

# Assuming df is your DataFrame

# Show the plot
plt.show()

That probably means whoever I got the code from just copy/pasted whatever the LLM spit out, and didn’t actually think about the code at all.

What is a small detail that you pay attention to because it means there’s bigger issues to watch out for?

  • Nfamwap@lemmy.world
    link
    fedilink
    arrow-up
    22
    ·
    edit-2
    2 months ago

    Part of my job (fibre project engineer) is to oversee the building of fibre optic spine cables. Think of an 864 fibre cable snaking it’s way through town with various drop off nodes for local access networks to be built.

    I also oversee the termination of the cable in the exchange, and the testing of the spine to make sure it’s within loss limits and that the right fibres are going to the right nodes.

    I will often put a minor fault on in the exchange to see if the guys doing the testing pick up on the issue and report it back to me. Maybe a slightly dislodged connector, or fibre 275 crossed with fibre 276, for example.

    Most of the time, the guys doing the testing will pickup on the issue and resolve it report it back to me. If it doesn’t get picked up on, I’ll make sure I keep a closer eye on the build crew.