andrew_bidlaw to Asklemmy@lemmy.mlEnglish · 7 hours agoDo you screw in both bolts on VGA cables, just the top one or ignore them altogether?imagemessage-square71fedilinkarrow-up168arrow-down12
arrow-up166arrow-down1imageDo you screw in both bolts on VGA cables, just the top one or ignore them altogether?andrew_bidlaw to Asklemmy@lemmy.mlEnglish · 7 hours agomessage-square71fedilink
minus-squareandrew_bidlawOPlinkfedilinkEnglisharrow-up1·6 hours agoAfter you properly connected it, sealing just one seems okay, isn’t it?
minus-squareBlueSquid0741@lemmy.sdf.orglinkfedilinkarrow-up3·4 hours agoIf you tighten just one side, it can pull the connector in that direction. Think of tightening heatsink screws unevenly on each side.
minus-squareandrew_bidlawOPlinkfedilinkEnglisharrow-up1·4 hours agoThese seem way more forgiving tho. Up to the point you can connect it hot and working and it’d go nice.
After you properly connected it, sealing just one seems okay, isn’t it?
If you tighten just one side, it can pull the connector in that direction. Think of tightening heatsink screws unevenly on each side.
These seem way more forgiving tho. Up to the point you can connect it hot and working and it’d go nice.