andrew_bidlaw to Asklemmy@lemmy.mlEnglish · 9 hours agoDo you screw in both bolts on VGA cables, just the top one or ignore them altogether?imagemessage-square71fedilinkarrow-up171arrow-down13
arrow-up168arrow-down1imageDo you screw in both bolts on VGA cables, just the top one or ignore them altogether?andrew_bidlaw to Asklemmy@lemmy.mlEnglish · 9 hours agomessage-square71fedilink
minus-squareEonNShadow@pawb.sociallinkfedilinkarrow-up4·3 hours agoLucky you lmao I still see them once every so often In fact, I went onsite to a customer who wanted a new PC set up because the old one “wouldn’t boot”. Sure enough the cable was sticking out of the monitor at about a 15deg angle. I pushed the VGA cable in a bit extra hard and it came right back. I was out of there in about 30min.
Lucky you lmao
I still see them once every so often
In fact, I went onsite to a customer who wanted a new PC set up because the old one “wouldn’t boot”. Sure enough the cable was sticking out of the monitor at about a 15deg angle. I pushed the VGA cable in a bit extra hard and it came right back.
I was out of there in about 30min.