Not sure why I can’t upload multiple images, but there’s another one just like this. Added some transtint dye to two coats of shellac, then two coats of poly, sprayed on with an HVLP gun. In hindsight, there are a few changes I would make to my design to make them easier to build, but I’m happy overall (and so is my wife)
Why does the drawer front cover the legs?
The stretcher is a lazy half lap joint, and I didn’t want to deal with clearance to fit the front between the legs.
I used long miters on the legs, and I set my table saw to 44.9° to get a slightly better outer edge, but didn’t fully consider the consequences. So the legs were slightly out of square, which made the sides, drawers, and shelves a bit squirrelly. In the future, I’ll just set the blade to 45° and fill any gaps in the joint (or just don’t use long miters).
Also learned that figure eight tabletop fasteners are stupid easy to install and work great. Got a bit more confident in building/installing drawers, which is something I’ve struggled with in the past.
Wow, that looks great! Nice work.
Thanks!
This look very nice
I really like the green drawers in the kitchen.
Thanks! I painted them when we moved in at my wife’s request.
