Almost forgot before going to bed but I feel bi-weekly is a good rhythm for this.
Let us know what you set up lately, what kind of problems you currently think about or are running into, what new device you added to your homelab or what interesting service or article you found.
You must log in or register to comment.
Immich. Wanted to exclusively use the external libraries features in read only.
Set it up once in its own Proxmox LXC under Docker. Set it up all properly started scanning my entire library. And when I woke up again it had crashed and I couldn’t recover it.
Started over the following morning and only gave it access to 2024 instead of everything. And it filled up to 30gb/40gb I gave it with thumbnails and files and such. Guess it crashed the other day because it took up too much room.
Guess I’ll start over again, and ensure all the config files and thumbnails are stored on my NAS so they can take up the space they need to without overloading the main (small SSD) on my server.
ITT: lots of busted pihole v6 updates
Finally got started with Grafana, Prometheus and Meshtastic.
I feel bi-weekly is a good rhythm for this.
What does biweekly mean to you? Twice a week, or once every two weeks? If it’s the latter, I prefer to use fortnightly, since it’s not ambiguous.
Yeah, nobody other than Brits use fortnightly anymore.
I mean every other week. I wasn’t aware of the other interpretation, but I think in combination with “The Sunday thread” it’s unambiguous?
I have never heard fortnightly, but then I’m not a native speaker. Is that commonly used?
I’ve had two failed harddrives in the last month. Not sure if bad batch or what. Thankfully the order these were on only were the two drives so may not see more. They are under warranty but it’s still a pain!
Otherwise I’m enjoying Mealie lately for my recipes. Kinda nice having them all in one place but accessible by anyone in the house.
Trying to get my hands dirty with LLM, Ollama and Web Scrapping.
I don’t understand most of it , but hey, that’s the fun. No complaints.
Pihole 6 broke my DNS (dnsmasq), and since I had a fw rule in opnsense to only use pihole’s DNS, and deny public DNS access, it was an early rise for me :)
Unbound broke on both of mine day one of v6 and I’ve still not gone and fixed it. Sigh.
And that’s why you have either a backup for your DNS or know whats auto-updated ;)
As you mention opnsense:
What do you mean with fw rules to only use pihole dns?
This sounds partly like a DHCP config and partly like a deny (hardcoded) DNS requests and to please use what DHCP supplied (looking at you google/amazon)I did have backups, it was an easy fix. I had a
pihole -upon a crontab for years, probably not the best idea :)FW rule accept :53 from pihole only, deny :53 from all. I had some devices with hardcored DNS settings (8.8.8.8).
Damn… DNS issue early in the morning… What a nightmare 😂! Hope you got enough caffeine.
Realised my jellyfin lxc had a maxed out bootdisk yesterday, haven’t been using it for a while. Luckily I have decent backups setup so I was able to restore a backup from late January when it wasn’t filled yet. A quick library rescan and everything was up and running again.
After having upgraded my Pi-Hole to v6, for some reason yesterday it started to not recognize any of the blocklists. So, I resetted it and now it works.
My pihole exploded yesterday, all my fault. A couple of years ago, I created a script called via cron to update pihole’s services every other week. This was great, until now when it updated to v6 at 4am. To make matters worse, I neglected to automate raspian updates, meaning it was very out of date, and was no longer compatible with pihole-FTL (thinking back, I thought I automated it too, but I guess not).
I took an image after creating a pihole “teleporter” backup, and began formatting. In my lack of caffeine and focus, I missed that my teleporter file was corrupt after I had successfully wiped the SD card. Thankfully I had that image as I was able to mount it and retrieve my blocklists via sqlite, otherwise I would have had to start from scratch.
One good thing that came out of it (for my taste, anyway) was that I swapped the OS on the pi to fedora. No more debian around here!
Tomorrow, I plan on setting up some backup automation for my pi, as it’s the only machine missing backups at this point.
Why so hostile sounding against debian?
What does fedora better?I don’t mean to sound hostile, that’s probably my past demons coming out. Like I said in my last comment, it’s really
aptthat I hate. It would constantly break or put me into dependency hell and I haven’t had to deal with that (yet) with Fedora.I haven’t put my finger on it, but Fedora, for whatever reason, also just feels faster.
@AmbiguousProps @tofuwabohu why would you privilege fedora over Debian? Asking because I am trying to do the reverse.
It’s mostly personal preference, but I have grown to hate
aptin general. I used it for over a decade and constantly got in dependency hell. I’ve yet to have anything like that happen on Fedora, especially Silverblue and CoreOS.
I’m in the process of doing an initial restic sync of my primary storage to B2 as offsite backup and while I’m at it finally got around having a look at resticprofiles to simplify my restic backups on all my systems. Highly recommend it as it reduced my mental overhead of doing regular backups quite a bit!
Had a hard drive fail my main zfs array. First time I have experienced a disk failure so it was a bit worrying. Thankfully I had added an additional drive to expand the array so I was able to quickly rebuild to that drive. Currently shopping for a replacement. From now on I think I will keep a cold spare just in case this happens again. I just wish hard drives would stop increasing in price.
Finally got my lemmy instance fully updated.
Been improving my backup scripts in advance of adding backup to a server.
Updated servers and other services.
I upgraded immich without breaking everything. That’s always reason to celebrate.
How exactly does stuff get broken? Never rly had a problem bumping up the version in docker. The only issue has been the playstore version taking longer to push updates sometimes for the mobile apps.
A few versions ago I upgraded it and some default port configs changed rendering it unusable. Since my upgrades are a docker command, I had to go hunt down the error message. It didn’t take long, but it def broke the setup.
I feel you 😂
I finally moved from reddit to Lemmy. maybe a 3-4 hour set up time to get it all working lol.
Cool! Which installation method did you use?
I did manual docker. I host some other things as well, so running it through nginx proxy manager that I already had set up.
I also planned to do the same (bare nginx instead of NPM but otherwise the same). Did you just remove the nginx container from docker compose and use the same arguments in NPM or do you double-reverseproxy or something else?
Short answer, yes I removed the nginx container from the lemmy compose file. I followed this guide if it helps: https://www.reddit.com/r/nginxproxymanager/comments/1485y0d/getting_lemmy_running_with_a_separate_nginx_proxy/
Since it’s winter and I mostly don’t want to leave my house, I busted out an unused Raspberry Pi 4b a couple weeks ago. Started with CasaOS and AdGuard. Have now added a few other services including Navidrome to serve up a lot of local-area music for myself and friends. Got a Cloudflare tunnel set up, then some authentication through CF as well. And finally secured a static IP from my ISP. This is the farthest along I’ve ever gotten with any of this and it’s been going great. Nearly every hurdle I’ve encountered I’ve been able to work through.
Two things causing me grief today though:
-
I also have Nextcloud hosted on a VPS and I cannot get to the point of running occ commands. First it wasn’t found, then no php cli, then just errors. I gave up.
-
I’m using Homer because it’s just so simple, but the theming and CSS is driving me nuts. Sure, I can change colors, but will this little bar in the neon theme change from 4em to 100% for me? NOPE. Override fonts? Nosir. All good though.
Try the OCCWeb app in nextcloud apps.
Thanks! It just threw an error at me when I launched it, but I’ll see what I can do. Based of the warnings in the admin panel, there isn’t anything critical for me to address, I just hate that orange.
-
