Maybe something you learned the hard way, or something you found out right before making a huge mistake.
E.g., for audiophiles: don’t buy subwoofers from speaker companies, and don’t buy speakers from subwoofer companies.
Maybe something you learned the hard way, or something you found out right before making a huge mistake.
E.g., for audiophiles: don’t buy subwoofers from speaker companies, and don’t buy speakers from subwoofer companies.
Just buy a good 3d printer for your first. Sure, it’ll cost money, but the heartache of constant troubleshooting and tweaking can just suck the fun out of the hobby if you just need this print to succeed.
Prusa Mini+ (I think) Bambu A1 Mini (this would be my #1 starter printer before the security updates they done)
But if you get a cheap one you get a free crash course on everything that could possibly go wrong on a print and how to avoid it.
Ender 3 btw
Good one. I struggled for years with a monoprice printer I basically got for free because Rakuten marketplace was shutting down and I had to use my rewards. I recently got a Bambu printer as a gift and it’s so much better at the same tasks, plus the additional features make me regret spending time upgrading my MP10.
One of those hobbies where starting cheap actually makes it not worth it. Kind of like a cheap camera can make you feel discouraged once you get pretty good at photography. A $500 camera can get you started, but a $1500+ (or refurbished more expensive option) will unlock a whole new level of creative abilities (speaking from experience!)
What would you say the gap between the “this 3d printer will do the job but make you lose your mind” and “this is a reliable 3d printer that is reasonably priced for hobbies”?
I kinda disagree with this, in certain contexts. There is some value in learning how the machine works by self-assembling a kit (or buying off-the-shelf parts and assembling from an open-hardware guide). Identifying the things that can be upgraded, tinkering with firmwares and nozzles, printing parts to upgrade the machine itself… all are a fun aspect of the hobby, if you’re interested in the hardware side.
But if you just want to make figurines from squirty plastic, then yeah just buy a moderately-priced, well-supported turnkey printer (though probably not a Bambu, because they’re sliding toward enshittification).
If not bambu, what do you recommend?
Current sovol sv07 plus user and facing this wall where I can’t decide if it’s a skills/knowledge issue or a hardware limit.
Sovol has been generally decent in my experience (SV08), but they’re kinda positioned between the “tinker” and “turnkey” markets. What wall are you running into?
Bambu would have been my recommendation before they tried to lock people into the cloud connection. They’ve reversed course (for now) due to the backlash, but they’ll do it again when they think they can get away with it.
At this point I’d probably say Prusa, but I don’t have firsthand experience with them so that’s based solely on what I’ve read. If you’re looking for something that will “just work” you’re going to need to search for what’s in your price range and then read everything you can about the models in question on support forums and reddit (ew). You can also learn a lot by watching YouTube videos but you have to be really careful to see past the “they gave me this for free/paid for the video so I’m going to minimize the negatives” crap.
Right now I have bunch of settings saved that results in a pretty decent PLA print, but it takes ages. (Layer of .15, print speed 50-100, gyroid infill 15%. Bed 60* nozzle 210). And I tried to print a tube to put coins in and it’s 5 hours. And the threads didn’t come out great.
Overhangs get me usually, but sometime later adhesion if I dare use the ultimate presets like “course”, even if I adjust the temp.
Also I tried updating utlimaker to the latest version, rather than the one it comes with, and then was a disaster that lead me down a rabbit hole to Orca.
Which was another rabbit hole that my partner had to emotionally support me through as the equivalents of “PCLOADLETTER” would trash my prints on a whim. Usually 3/4 of the way through.
I bought this printer to print dust collector fittings and adaptors for power tools (I lead a construction team and I’m pro-safety) and I can usually get a print strong enough for the job, if not pretty.
But I’d like pretty…I’d like to be able to fine tune a print so it’s sexy and strong and also didn’t take 16 hours… Boaty takes 20 minutes and o Looks good every time I print so I just don’t get why something not as complex and the same size takes over an hour and doesn’t come out as clean.
Great point! It also depends on how much time you have for it. I built a 3D printer when I was younger because I had hours most days to work on it.
Now I would probably only have a few hours a week to tinker, so if I spent most of that time just working on the printer and couldn’t get stuff actually printed and printed well, that would feel like wasted time personally!
Would be kinda cool to buy a functioning printer and print parts for a diy printer. Then it’ll have children haha!